Prijzen excl. btw excl. verzendingskosten
Klaar voor onmiddellijke verzending, leveringstijd circa 1-3 werkdagen
- Productnr.: 093005
SDR Modulator for software based modulation for digital and analog into existing coaxial cabling. Older PAL equipment can be re-used, with current channel offerings, eg: hospitals, housing complexes, training centers, etc.
The Digital Devices SDR Modulator card can send any type of modulation mode in a spectrum of 200 MHz. A large part of the signal processing is executed in software. PAL TV is the first modulation type already available. Other types of modulation, such as DVB-T, are currently under development.
The SDR Modulator cards‘ PAL-version is used to feed any DVB signal sources (hard disk, DVB-S, DVB-T, etc.) into an existing coaxial cable with PAL TV.
The cost of a project for the entire reconstruction of a building complex to digital technology can quickly increase your project. In many areas, already and in coming years, the analog TV will switched off. With the Digital Devices RESI SDR Modulator, you save costs for the purchase of digital devices where it is not absolutely necessary.
Die Highlights:
- Frequenzbereich: 114 – 858MHz
- Ausgangsleistung z.B. bei PAL-Modulation mit 16 Kanälen (pro Kanal): 97 dBµV
- Leistungsaufnahme: ≈ 20 Watt
- PCIe X4 Generation 1
- PCIe – Low Profile
- Software für Linux
- Linuxtreiber
- Beispielapplikation für PAL
- Produktivapplikation für PAL
- PAL-Modulation: 16 Kanäle beliebig positionierbar innerhalb 200MHz
SDR Modulator: PAL-Modulation
- Frequenzbereich: 114 – 858 MHz
- 16 Transponder
Max S8 = 8 x DVB-S2 Tuner
Max A8 = 8 x DVB-C/C2/T/T2 Tuner
Ausgang
- Frequenzbereich: 114 – 858 MHz
- Modulationsarten: PAL, weitere folgen
- 16 Transponder
- Ausgangsleistung:
- pro Kanal bei 16 Kanälen aktiv: 97 dBµV
- Signal/Rausch Verhältnis: 42dB
- Leistungsaufnahme
- ≈ 20 Watt
Abmessungen
- H 69,5mm, B 152mm, T 30mm
Umwelt und Sicherheit
- RoHS konform
- WEEE entsprechend
- nach europäischen ISO Richtlinien gefertigt
unterstützte Betriebssysteme
- Linux (ab Kernel 2.6.34)
Systemvoraussetzungen
- Intel CPU mit Quicksync
(SD/HD Hardwaredecoding) - Intel® Core i7-6700K
- Xeon E3-1275-V5
- min. 8 GB RAM
- ein freier PCIe Steckplatz (x4 bis x16)