DVB-C QAM headend for up to 16x QAM transponders and 24x SAT tuners/inputs incl. 4x CI slots for PayTV and IPTV input. Highlight: No conversion of entire SAT transponders more necessary, mix from different DVB-S2 transponders a new QAM transponder and use only the TV channels they also need. Feed into your house wiring up to 16x DVB-C (QAM) transponders, from up to 24x DVB-S/S2/S2X converted transponders. Transponder-spanning re-mixing of services, Pay TV and the feed of IPTV (Mulitcast, Unicast, HLS, SRT) are no obstacle. The RESI headend generates up to 16 DVB-C transponders with high bandwidth using QAM256 modulation and a symbol rate of up to 7000 sym/s. The headend is remotely managed by our DDM tool for Windows, Linux or MAC via IP V4 or IP V6. No matter if hotel, multi-party residential building, cruise ship or student dormitory. There are many scenarios where SAT reception is possible without problems, but then it becomes problematic at the cabling. New installations or old cables quickly present obstacles. With the RESI headend you save the expensive cable connection or the subsequent laying of coaxial conductors and simply feed the converted SAT signal or IPTV on your house coaxial cabling. Particularly in the hotel industry can be guaranteed by means of the integrated CI slots and with subscription of a hotel contract with appropriate PayTV Providern, a surface-thinking supply of all rooms. All RESI headend stations are equipped with at least 4 CI slots as standard. Configurable comfortably via remote access by means of our DDM software, which establishes a connection to the head-end station via LAN over IPV4 or IPV6. Via a graphical user interface, not only the operating status can be monitored live, but also the configuration is carried out. After selecting the channels to be converted, they are simply distributed to the respective new DVB-C QAM transponders. There is no need to travel to the customer's premises, as the configuration can be carried out remotely. By means of a message system, you will receive a message immediately in the event of a malfunction. Time-consuming on-site measurements are no longer necessary. Support several head-end stations at different projects or customers directly from your company headquarters. Measure the signal inputs, such as signal strength, SNR, BER, etc., as well as the output power of the head-end station via remote access. Online updates are distributed as easy as configuration, with just one click you can keep your headend always up to date with all improvements from our side, as well as system and security updates. The RESI headend is housed in a 19" 1U industrial case to save space in the server rack. The power consumption of the RESI headend is just 40 watts (fully equipped with up to 24 QAM output transponders and 24 tuners for the SAT inputs). This product is made and produced in Germany and is subject to strict controls in the area of quality as well as environmental protection. We do not use electrolytic and tantalum capacitors in our modules. This is good for the environment and means a much longer lifetime (MTBF 500.000 h and more).

DVB-C QAM headend for up to 24x QAM transponders and 24x SAT tuners/inputs incl. 4x CI slots for PayTV and IPTV input. Highlight: No conversion of entire SAT transponders more necessary, mix from different DVB-S2 transponders a new QAM transponder and use only the TV channels they also need. Feed into your house wiring up to 24x DVB-C (QAM) transponders, from up to 24x DVB-S/S2/S2X converted transponders. Transponder-spanning re-mixing of services, Pay TV and the feed of IPTV (Mulitcast, Unicast, HLS, SRT) are no obstacle. The RESI headend generates up to 24 DVB-C transponders with high bandwidth using QAM256 modulation and a symbol rate of up to 7000 sym/s. The headend is remotely managed by our DDM tool for Windows, Linux or MAC via IP V4 or IP V6. No matter if hotel, multi-party residential building, cruise ship or student dormitory. There are many scenarios where SAT reception is possible without problems, but then it becomes problematic at the cabling. New installations or old cables quickly present obstacles. With the RESI headend you save the expensive cable connection or the subsequent laying of coaxial conductors and simply feed the converted SAT signal or IPTV on your house coaxial cabling. Particularly in the hotel industry can be guaranteed by means of the integrated CI slots and with subscription of a hotel contract with appropriate PayTV Providern, a surface-thinking supply of all rooms. All RESI headend stations are equipped with at least 4 CI slots as standard. Configurable comfortably via remote access by means of our DDM software, which establishes a connection to the head-end station via LAN over IPV4 or IPV6. Via a graphical user interface, not only the operating status can be monitored live, but also the configuration is carried out. After selecting the channels to be converted, they are simply distributed to the respective new DVB-C QAM transponders. There is no need to travel to the customer's premises, as the configuration can be carried out remotely. By means of a message system, you will receive a message immediately in the event of a malfunction. Time-consuming on-site measurements are no longer necessary. Support several head-end stations at different projects or customers directly from your company headquarters. Measure the signal inputs, such as signal strength, SNR, BER, etc., as well as the output power of the head-end station via remote access. Online updates are distributed as easy as configuration, with just one click you can keep your headend always up to date with all improvements from our side, as well as system and security updates. The RESI headend is housed in a 19" 1U industrial case to save space in the server rack. The power consumption of the RESI headend is just 40 watts (fully equipped with up to 24 QAM output transponders and 24 tuners for the SAT inputs). This product is made and produced in Germany and is subject to strict controls in the area of quality as well as environmental protection. We do not use electrolytic and tantalum capacitors in our modules. This is good for the environment and means a much longer lifetime (MTBF 500.000 h and more).

DVB-C QAM headend for up to 8x QAM transponders and 24x SAT tuners/inputs incl. 4x CI slots for PayTV and IPTV input. Highlight: No conversion of entire SAT transponders more necessary, mix from different DVB-S2 transponders a new QAM transponder and use only the TV channels they also need. Feed into your house wiring up to 8x DVB-C (QAM) transponders, from up to 24x DVB-S/S2/S2X converted transponders. Transponder-spanning re-mixing of services, Pay TV and the feed of IPTV (Mulitcast, Unicast, HLS, SRT) are no obstacle. The RESI headend generates up to 8 DVB-C transponders with high bandwidth using QAM256 modulation and a symbol rate of up to 7000 sym/s. The headend is remotely managed by our DDM tool for Windows, Linux or MAC via IP V4 or IP V6. No matter if hotel, multi-party residential building, cruise ship or student dormitory. There are many scenarios where SAT reception is possible without problems, but then it becomes problematic at the cabling. New installations or old cables quickly present obstacles. With the RESI headend you save the expensive cable connection or the subsequent laying of coaxial conductors and simply feed the converted SAT signal or IPTV on your house coaxial cabling. Particularly in the hotel industry can be guaranteed by means of the integrated CI slots and with subscription of a hotel contract with appropriate PayTV Providern, a surface-thinking supply of all rooms. All RESI headend stations are equipped with at least 4 CI slots as standard. Configurable comfortably via remote access by means of our DDM software, which establishes a connection to the head-end station via LAN over IPV4 or IPV6. Via a graphical user interface, not only the operating status can be monitored live, but also the configuration is carried out. After selecting the channels to be converted, they are simply distributed to the respective new DVB-C QAM transponders. There is no need to travel to the customer's premises, as the configuration can be carried out remotely. By means of a message system, you will receive a message immediately in the event of a malfunction. Time-consuming on-site measurements are no longer necessary. Support several head-end stations at different projects or customers directly from your company headquarters. Measure the signal inputs, such as signal strength, SNR, BER, etc., as well as the output power of the head-end station via remote access. Online updates are distributed as easy as configuration, with just one click you can keep your headend always up to date with all improvements from our side, as well as system and security updates. The RESI headend is housed in a 19" 1U industrial case to save space in the server rack. The power consumption of the RESI headend is just 40 watts (fully equipped with up to 24 QAM output transponders and 24 tuners for the SAT inputs). This product is made and produced in Germany and is subject to strict controls in the area of quality as well as environmental protection. We do not use electrolytic and tantalum capacitors in our modules. This is good for the environment and means a much longer lifetime (MTBF 500.000 h and more).

The Digital Devices RESI Headend DVB-T 16 enables the conversion of up to 16 DVB-S/S2/S2X transponders into 16 DVB-T transponders. Satellite signals can be distributed via existing coaxial cabling without the need for re-cabling. The headend provides an efficient alternative to conventional broadband cable connections and is ideally suited for hotels, residential complexes, hospitals, spa facilities, or apartment buildings. Through the four integrated Common Interface slots (no CI+), encrypted channels can be decrypted and fed centrally. Configuration and remote maintenance are carried out via the DDM software for Windows, Linux, and Mac OS. The 16 DVB-T transponders can be arbitrarily assigned to 96 output frequencies ranging from 114 to 848 MHz. Energy efficiency is enhanced by the fact that the headend performs no transrating – the output data rate of a TV channel corresponds to the input data rate. Conversion of 16 DVB-S/S2/S2X transponders into 16 DVB-T channels Approximately 30 Mbit/s bandwidth per DVB-T transponder Spectrum scan for analysis and rapid channel search Mixing of new transponders Four CI slots for encrypted TV channels (no CI+) Configuration and remote maintenance via DDM software Assignment of the 16 DVB-T transponders to 96 output frequencies from 114 to 848 MHz Power consumption of 30–40 W at full capacity Compact housing (300 x 164 x 137.5 mm) with regulated fans Durable construction without electrolytic and tantalum capacitors (MTBF over 500,000 hours) The headend can be monitored and managed remotely using the DDM tool. Signal strength, SNR, and lock behavior can be measured, activities are automatically reported, and on-site measurements are unnecessary. Software updates can be conveniently applied online.  As a satellite input signal, the headend can be connected directly to existing LNBs (Quad or Quattro) or operated via a multiswitch. Additionally, support for Unicable® according to EN50494 and JESS®/Unicable II® according to EN50607 is available.   Tip For simultaneous use of the coaxial cabling for TV and Gigabit network data, the headend can be combined with the AMP X8 distribution amplifier and/or the EOC 2000 adapters (Ethernet over Coax). This allows you to optimally utilize the existing coax infrastructure without having to install additional network cables.  Ethernet over Coax Gigabit Products More information on Ethernet Over Coax    

The Digital Devices RESI Headend DVB-T 8 enables the conversion of up to 8 DVB-S/S2/S2X transponders into 8 DVB-T transponders. Satellite signals can be distributed via existing coaxial cabling without the need for re-cabling. The headend provides an efficient alternative to conventional broadband cable connections and is ideally suited for hotels, residential complexes, hospitals, spa facilities, or apartment buildings. Through the four integrated Common Interface slots (no CI+), encrypted channels can be decrypted and fed centrally. Configuration and remote maintenance are carried out via the DDM software for Windows, Linux, and Mac OS. The 8 DVB-T transponders can be arbitrarily assigned to 96 output frequencies ranging from 114 to 848 MHz. Energy efficiency is enhanced by the fact that the headend performs no transrating – the output data rate of a TV channel corresponds to the input data rate. Conversion of 8 DVB-S/S2/S2X transponders into 8 DVB-T channels Approximately 30 Mbit/s bandwidth per DVB-T transponder Spectrum scan for analysis and rapid channel search Mixing of new transponders Four CI slots for encrypted TV channels (no CI+) Configuration and remote maintenance via DDM software Assignment of the 8 DVB-T transponders to 96 output frequencies from 114 to 848 MHz Power consumption of 30–40 W at full capacity Compact housing (300 x 164 x 137.5 mm) with regulated fans Durable construction without electrolytic and tantalum capacitors (MTBF over 500,000 hours) The headend can be monitored and managed remotely using the DDM tool. Signal strength, SNR, and lock behavior can be measured, activities are automatically reported, and on-site measurements are unnecessary. Software updates can be conveniently applied online.  As a satellite input signal, the headend can be connected directly to existing LNBs (Quad or Quattro) or operated via a multiswitch. Additionally, support for Unicable® according to EN50494 and JESS®/Unicable II® according to EN50607 is available.   Tip For simultaneous use of the coaxial cabling for TV and Gigabit network data, the headend can be combined with the AMP X8 distribution amplifier and/or the EOC 2000 adapters (Ethernet over Coax). This allows you to optimally utilize the existing coax infrastructure without having to install additional network cables.  Ethernet over Coax Gigabit Products More information on Ethernet Over Coax