Bracket L for CI + DuoFlex Model For assembly of a CI module and DuoFlex a module (C / T or S2 Rev. V3) on a full profile bracket.DuoFlex modules, CI or CAM are not included.Note: The bracket will not fit into slots where a motherboard port (PCI or PCIe) is located. It only fits on free slots or in housing, the bracket lying areas.
Bracket DuoFlex + CI model M To mount a DuoFlex S2 module from Rev. V3 and a CI module on a full-profile bracket.
DuoFlex, CI or CAM modules are not included.
Warning: Not suitable for DuoFlex CT V1 module (L bracket)
Note: The bracket will not fit into slots where a motherboard port (PCI or PCIe) is located. It only fits on free slots or in housing, the bracket lying areas.
Slot-bracket X for DuoFlex + CI Module for HFX Micro Cases
For mounting a DuoFlex CT Module Rev. V2 or DuoFlex S2 Module Rev. V3
and a CI Module on one Full Profile Slot-bracket
DuoFlex, CI or CAM Module are not included
Notice: Not for DuoFlex CT V1 Module suitable - only Slot-bracket L
Split ring core with plastic housing for unfolding for attenuating disturbances in power cables.
Easy to mount on already installed or fitted with connectors cables. The plastic housing with lock provides protection against mechanical damage.
Ground breaker Koax-connector/coupling with overvoltage protection5-1000 MHz, attentuation: >0,7 dB with voltage isolation: 50V DCFor noise removal at Cable TV systemsSeparates ground from antenna and receiver devicesimpedes buzzing noise
High Speed HDMI-Cable
HDMI-Plug 19 pol. to HDMI-Plug 19 pol.
The 3 meter HDMI cable with gold plated contacts is of course ideal for Full HD, 1080P and 3D playback. The cable have a 2-fold shielding to guarantee a trouble-free audiovisual transmission. The cable supports HDCP and is HDMI 1.4 compliant.
gold plated contacts
3,0 m,white
splashed Plug,
High Quality, AWG28,
Cable - Ø 7,0 mm
Inverto combiner to connect two Unicable LNB or multi-switch.
Using the Inverto Combiners, connect two Unicable Inverto multiswitch or LNB (not supported by any model) to one receiving unit for receiving several satellites. For this purpose the LNB / multiswitch must be programmed according to the incoming position requests (DiSEqC) react properly. It is for this purpose requires a special programming device that you can purchase or rent from us.
Koax-Connector to Koax-ConnectorMetal-nickelplated shield attenuation > 75 dBTo use for the Radioport at Antennabox as TV OutputAttention: Not all Antennaboxes serve the full TV Band (0,5-1000 MHz) at the RadioportYou can find the technical information of you Antennabox in the manual of the manufactor.
Additional fan for Max serial cards for mounting on K5 slot bracket. The fan is optional and can be installed directly on the cards of the Max series to increase a overheat prevention in casing with higher heating or poor air circulation. A normal ventilation over casing fans is normally sufficient.
5.25" to 2x 3.5" power adapter for older DD products with 3.5 "Molex FDD plug (approx. 20 cm total length) For connecting 2 digital devices products, e.g. Cine S2 + FlexCI Interface or DuoFlex + CI Interface with 3.5" floppy power connector on a 5.25" drive power connector.
Before ordering, please check the connection on your digital devices card to see whether it has a 3.5" FDD Molex connector. For newer models, you need a cable with a Sherlock connector.
SATA Powercable to 2x 3,5 power-adapter
ca. 20cm cable length
If your power supply has no floppy power adapter moreis this adapter that adapts the SATA power connector,ideal for to supply the DuoFlex or CI modules.
SATA powercable-adapter to 3,5 & 5,25
ca. 20 cm lenght
If you Power supply have no Floppy Power Cable
can you with this adapter convert the SATA Plug to one 3,5 and 5,25 Plugs.
Power Cable for Sherlock to 3.5 floppy / Molex (male), ca. 10 cm
Special adapter for SATA power adapter (SATA to 3.5 "and 5.22" and SATA to 2x 3.5 ") with the item numbers (094129 and 094128) to use electricity of a SATA basis power plug.