SAT F-Connector to Coax-ConnectorReplacement for Digital Devices Max M4 with F-connector for cable/terrestrial input and Digital Everywhere Floppy DTV-C
Antenna cable 2m white - High Quality Class A (BZT KU 11 888 CE)Antenna connection cable in Class A quality with a attenuation of shielding of >85 dB with angel-connectorsMale Connector to female Connector with absorber-ferrite.ideal patch cable for example between Antennabox and TV Card.
4-Way-Splitter - 5x F-CouplingHigh Quality Series 5-1000 MHzdirectional coupler splitter for EA-installation, GAi-nstallation, BK-installationfull funtional with all special-broadcastings, backward channelimpedance: 75 OhmShielding:5-470 MHz: >75 dB470 - 1000 MHz: > 65 dB
return loss at 500MHz: > 20 dBthrough loss at 500 MHz: 4,2 dBtap loss at 500 MHz: 13/14/15/16 dB ±1,5
Diecast chassis with F-connectors
6-Way-Splitter - 7x F-CouplingHigh Quality Series 5-1000 MHzdirectional coupler splitter for EA-installation, GA-installation, BK-installationfull funtional with all special-broadcastings, backward channelimpedance: 75 OhmShielding:5-470 MHz: >75 dB470 - 1000 MHz: > 65 dBMetal die cast case with f connectorsbackward attentuation at 500 MHz > 18 dBforward attentuation at 500 MHz 10 dBdecoupling 25 dBmark of conformity: ZZF G686566B - FZT K U11 888High quality Class A
Antenna Cable 1,5m white - High quality Class A (BZT KU 11 888 CE)in Class A Quality - attenuation of shielding: > 80 dBF-Connector to Antenna coupling (9,5 mm)Ideal patch cable for example: between 4/6/8 Splitter and antenna-boxInternal conductor: Staku 0,65double shielding, Al-film / Al-wire mash 64 x 0,12
Antenna Cable 1,5m white - High Quality Class A (BZT KU 11 888 CE)in Class A quality shield attenuation > 80 dBF Connector to Antenna Connector 9,5 mmideal patch cabel for example: between 4/6/8 splitter and TV Cardinternal conductor: Staku 0,65double shielding, Al-film / Al wire mesh 64 x 0,12
The GT-Link mini Bridge for up to 3 Max series cards on the miniPCI Express port.
With the GT-Link mini PCIe Bridge you can connect up to 3 Max series cards to one mini PCI Express slot.Ideal for all boards where a full mini PCIe connector is available.
Please note the following information for this item:
The GT-Link mini PCIe Bridge is currently only usable under Linux operating systems. There is currently no Windows driver available.
Connected Max series cards require external power via the 4-port Sherlock power connector on the card and a data cable.
DuoFlex, Octopus or Cine series can not be connected to this bridge. For DuoFlex modules please use the Digital Devices Octopus mini V2 - 4 Port Bridge for mini PCIe
If no data cables or power adapters are available (not included), they can be ordered via the selection fields.
Octopus mini V2 (mini-PCI Express Bridge) separate, for Digital Devices DuoFlex Tuner and / or Common Interface
Attention: Not every Mainboard has a mini PCIe port, this occurs usually only in ION Board.
Please check this before you order.
At the mini PCIe Bridge you can connect up to 4 Double Tuner (8 Tuner)Mix Operation with CI Modul or S2 and CT Moduls is possible
DD slot bracket ED - Full profile slot bracket for Octopus Twin-CI | DuoFlex CI
Low profile slot bracket for Twin-CI modules of the DuoFlex and Octopus series.
Not suitable for Flex CI.
DD Slotbracket FD - Low Profile Slotbracket for Octopus Twin-CI
Low profile slot bracket for Twin-CI modules of the DuoFlex and Octopus series.
Not suitable for Flex CI.
DuoFlex Model H Full profile Bracket
of this bracket is for mounting two modules DuoFlex C / T or DuoFlex S2 (V3)
Mix and match is of course also possible.
DuoFlex modules are not included.
Low Profile Slotbracket for DuoFlex CT and DuoFlex S2 Module
Model "I" With this practical slot bracket you can install a card of DuoFlex CT or DuoFlex S2 series, in a low-profile environment. This item is a replacemnet bracket for misplaced or lost Slotbrackets. This Slotbracket are included with the respective products.
Bracket for Max Series, Cine/DuoFlex Bridge - Model K5
For installation of a PCI bridge / Octopus or Cine Card and DuoFlex one module (C / T or S2 Rev. V3) on a full-profile bracket.
The Slotbracket can also be used for Max Series cards.
DuoFlex modules or Cine Cards are not included.
The K5 slot bracket replaces the previous version of the "K" slot bracket series and is backward compatible with the cards that had a different version of the "K" bracket.
Bracket L for CI + DuoFlex Model For assembly of a CI module and DuoFlex a module (C / T or S2 Rev. V3) on a full profile bracket.DuoFlex modules, CI or CAM are not included.Note: The bracket will not fit into slots where a motherboard port (PCI or PCIe) is located. It only fits on free slots or in housing, the bracket lying areas.
€4.95*
This website uses cookies to ensure the best experience possible. More information...
