Inverto Unicable I / II LNB 1/24 - IDLU-24UL40-UNMOO-OPP 5228

€ 36,05 *

Prijzen excl. btw excl. verzendingskosten

Klaar voor onmiddellijke verzending, leveringstijd circa 1-3 werkdagen

  • 955228
UniCable LNB for use with devices according UniCable (standard EN 50494 - 8 User bands) and...meer
Productinformatie "Inverto Unicable I / II LNB 1/24 - IDLU-24UL40-UNMOO-OPP 5228"
UniCable LNB for use with devices according UniCable (standard EN 50494 - 8 User bands) and UniCable II (new standard EN50607 - 24 User bands). Through the combination of both standards, older devices can be used, here are the first 8 frequencies available.
 
Professional Unicable LNB - 24 User Bands - No headend or QAM modulator longer necessary. Unlimited supply of receivers / STBs in static mode or via the Standard Unicable II - 24 User Bands - Perfect for TV cards of Max, Cine and DuoFlex series and everywhere many receivers must be supplied as in apartment buildings and building complexes.
 
This Unicable II LNB enables installations with up to 24 satellite receivers connected over a single coax cable and using the EN50494/EN50607 protocols providing access to unlimited number of transponders (also known as ‘Dynamic’ mode) . Alternatively, it can be configured to deliver a fixed mapping of transponder frequencies to IF frequencies (also known as ‘Static’ mode), allowing an unlimited number of receivers to be connected and providing them access to up to 24 transponders (or more, depending on the bandwidth of the desired transponders) based on digital channel stacking technology.
 
Digital channel stacking technology uses fast wide­band analog to digital converters and applies digital signal processing to select desired transponder channels, up convert them and stack them as IF signals over the Unicable output ports. The Unicable II LNB offers a full flexibility of channel selection, supports many more set-top-boxes over existing cabling thus significantly reducing cost and simplifying installations at subscribers homes. The Static mode, allowing an unlimited number of receivers to be connected to the LNB, makes multi-room distribution and MDU installations substantially cheaper and simpler than ever before. The operating mode - dynamic or static - output power level, channel bandwidth, UB numbers, center frequencies and dish alignment mode are all programmable and can be configured and updated in the field using a dedicated programmer device - the SatPal Controller / USB Programmer*.

The LNB can be powered over a connected STB or by an AC/DC adapter over a power inserter in case the STB is unable to provide the necessary power. TheUnicable IIis backward compatible, fully compliant with both EN50494 and EN50607 standards and integrates seamlessly into EN50494-only or mixed EN50494/EN50607 installations of compatible STBs, Next Generation PVRs and HGWs.
Verdere links naar "Inverto Unicable I / II LNB 1/24 - IDLU-24UL40-UNMOO-OPP 5228"
Eingangsfrequenzbereich 10.7 GHz ~ 12.750 GHz
Oszillatorfrequenz (LO) 10.4 GHz
Rauschmaß 1 dB max.
Oszillator (LO) Temperaturdrift (25° C) ±2.5 MHz Max.
Oszillator (LO) Anfangsgenauigkeit ±1.0 MHz Max.
Oszillator (LO) Phasenrauschen (10 kHz) -80 dBc / Hz max.
Verstärkung 55 dB min.
Verstärkungsschwankung (im Vollband) ±0,75 dB/UB max.
Spiegelfrequenzunterdrückung 40 dB min.
1 dB Kompressionspunkt (am Ausgang) 0.0 dBm min.
Kreuzpolarisationsunterdrückung 22 dB min.
Ausgang VSWR 2.5 : 1 
Stromaufnahme 350 mA max. @ 13.5 V
Betriebstemperatur -30 °C  ~  +60 °C
Ausgangsimpedanz 75 Ω
Ausgangsanschluss F-Type (female)
Gewicht 350 g
User Band (Kanal) Bandbreite Configurable 10 MHz ~ 80MHz (default 42 MHz)
User Band Frequenzen (Kanäle) Up to 24 Unicable II™ dynamic user bands:
  CH1 1210MHz (EN50494+EN50607)
  CH2 1420MHz (EN50494+EN50607)
  CH3 1680MHz (EN50494+EN50607)
  CH4 2040MHz (EN50494+EN50607)
  CH5 1005MHz (EN50494+EN50607)
  CH6 1050MHz (EN50494+EN50607)
  CH7 1095MHz (EN50494+EN50607)
  CH8 1140MHz (EN50494+EN50607)
  CH9 1260MHz (EN50607)
  CH10 1305MHz (EN50607)
  CH11 1350MHz (EN50607)
  CH12 1475MHz (EN50607)
  CH13 1520MHz (EN50607)
  CH14 1565MHz (EN50607)
  CH15 1610MHz (EN50607)
  CH16 1725MHz (EN50607)
  CH17 1770MHz (EN50607)
  CH18 1815MHz (EN50607)
  CH19 1860MHz (EN50607)
Kanalisolierung 25 dB Min.
Unicable Steuersignale DiSEqC1.x / DiSEqC2.x, EN50494 / EN50607
TIP!
TIP!
Set Artikel
TIP!
Laatst bekeken