4x multi-band tuner TV Card - DD Max M4

4x multi-band tuner TV Card - DD Max M4
€ 251,26 *

Prijzen excl. btw excl. verzendingskosten

Klaar voor onmiddellijke verzending, leveringstijd circa 1-3 werkdagen

  • 820054
Digital Devices Max M4 Multituner TV Card - the all-rounder for satellite, cable or...meer
Productinformatie "4x multi-band tuner TV Card - DD Max M4"

Digital Devices Max M4 Multituner TV Card - the all-rounder for satellite, cable or terrestrial reception

A 4-fold multi-band tuner HD TV Card / Tuner Card for the PCIe Slot for the following reception types:

  • DVB-S(satellite tuner)
  • DVB-S2 (satellite tuner)
  • ISDB-S (satellite tuner)
  • DVB-C (cable tuner)
  • DVB-C2 (cable tuner)
  • ISDB-C (cable tuner)
  • J.83 (cable tuner)
  • DVB-T(terrestrial tuner)
  • DVB-T2 (terrestrial tuner)
  • ISDB-T (terrestrial tuner)

The Digital Devices Max M4 is a multi-tuner TV card. It has the capabilities of digital reception for satellite (DVB-S / S2 / ISDB-S), cable (DVB-C / C2 / ISDB-C / J.83) or terrestrial (DVB-T / T2 / ISDB-T).

The reception of SD to Ultra HD modulated channels on the transponders of the provider is no problem for the M4. Due to the low power consumption of ~ 7 watts, the card works very economically. The Max M4 Multituner card comes in Full Profile Format (full height) with corresponding bracket.

The choice of reception is done dynamically. The Max M4 has four individual front ends, depending on the tune request, the card switch automatically to a free cable, satellite or terrestrial tuner. Through the dynamically switching, a reprograming of the receiving mode during operation is not needed. Thus a DVB-C or DVB-T2 connection can be used for bad weather alternative with disturbed SAT reception, in order to keep a running operation.

Receive stations from different sources, such as SAT and terrestrial, without investing in different receiving systems. If not only satellite, but also cable TV should to be received at a location(for example for local channels), this is now possible without any problems with the Max M4.

For operation with a standard satellite receiving system (star cabling), you need a cable for each DVB-S tuner to the Max M4, thus also the card can be used with full DiSEqC support. Likewise, the use of Unicable I (EN50494) and Unicable II / JESS (EN50607) systems is easily possible. To supply the individual SAT tuners with a Unicable signal, the SAT inputs of the card are connected to the Unicable system by a Unicable splitter.

For operation on a cable provider or terrestrial antenna, only one cable from the DVB-C wall socket or antenna is needed. The signal is internally distributed to the tuner, thus no splitter parts are needed.

In the field of data analysis, you now receive the data from one source from different reception types, e.g. Advertising analysis, time offset, data rate of individual transmissions. Also the dynamic switching of the required reception type offers advantages, becuase a changing is immediately possible.

The hardware design of the card allows an operation in the 24/7 envoirement for professional and home use. Thanks to the use of high-quality components, such as ceramic capacitors and the absence of environmentally hazardous substances, the Max M4 ensures a long lifetime even with permanent use of the hardware.

The Digital Devices Max M4 can be extended with an Octopus Single-CI or Octopus Twin-CI card via an additional PCIe slot and of course also other connected Flex-CI modules from Digital Devices can be used.

Drivers for Windows XP, Windows 7, Windows 8 (.1) as well as Windows 10 and Linux.


* 1 Unicable® Requires Unicable® / SCR / CENELEC EN50494 compliant LNB or multiswitch to EN50494
* 2 JESS® Requires Jess® / CENELEC EN50607 compliant LNB or multiswitch to EN50607

 

 

 

Verdere links naar "4x multi-band tuner TV Card - DD Max M4"
  • Verkaufsverpackung
  • MAX M4 PCI Express Karte (Volle Bauhöhe)
  • Slotblech Volle Bauhöhe (vormontiert)
  • Schnellinstallationsanleitung
  • Handbuch (online)
  • Treiber (online)
  • Software DD-TV (online)
  • 4-fach Multi-Band Tuner
  • DVB-S (Satelliten Tuner)
  • DVB-S2 (Satelliten Tuner)
  • ISDB-S (Satelliten Tuner)
  • DVB-C (Kabel Tuner)
  • DVB-C2 (Kabel Tuner)
  • ISDB-C (Kabel Tuner)
  • J.83 Annex B (Kabel Tuner)
  • DVB-T (Terrestrischer Tuner)
  • DVB-T2 (Terrestrischer Tuner)
  • ISDB-T (Terrestrischer Tuner)

  • Hinweis: es ist ein beliebiger Mischbetrieb zwischen Satellit, Kabel und Terrestrisch möglich.
    Für Kabel und Terrestrisch steht nur ein Eingang zur Verfügung
  • DVB-S2 Merkmale
  • QPSK/8PSK bis 46 MSym mit bis zu 120 MBit/s (für neue UltraHD-Transponder)
  • Empfindlichkeit < 30 dBµV
  • DVB-T2 Merkmale
  • DVB-T2 Spezifikation Versionen: 1.1.1, 1.2.1 und 1.3.1
  • DVB-T2 Base Profile
  • DVB-T2 Lite(!) Profile
  • ISDB-C Merkmale
  • mit TSMF Support
  • Einkabellösung
  • Ein Antennenkabel versorgt alle Kabel-/terrestrischen Tuner
  • Unicable® SCR / Cenelec EN50494
  • Unterstützt eine Verbindung von bis zu 8 Tunern über ein Antennenkabel Voraussetzung: Unicable®/ SCR / CENELEC EN50494 konformes LNB oder Multischalter nach EN50494
  • JESS© / Cenelec EN50607
  • EN50607 bis zu 32 Tuner über ein Antennenkabel!
  • Voraussetzung: CENELEC EN50607 konformes LNB oder Multischalter nach EN50607
  • DiSEeqC 2.0 Support
  • PCIexpress
  • Anschluss via PCIe x1 bis x16 slot
  • GT-Link Port
  • zum Anschluss an eine Octopus NET (Datenrate > 1GBit)
  • Hinweis: Betrieb an PCI Express oder GT-Link Port
  • HDTV Empfang – 1080p
  • Unterstützung vieler TV-Applikationen
  • z.B. Microsoft Windows® Media Center 7/8
  • DVBViewer, Media Portal, Gen2VDR, MythTV
  • Umweltfreundliche Green IT
  • Leistungsaufnahme max. nur 7 Watt
  • Ohne Tantalkondensatoren
    Ohne Elektrolytkondensatoren
  • Unterstützte Betriebssysteme
  • Microsoft Windows® XP/7/8(.1)/10
  • Linux (ab Kernel 2.6.34)
  • Satelliten Merkmale
  • Bis zu 46 MSymbole DVB-S2, QPSK, 8PSK
  • LNB Power: 4 * max. 19V, 1A Pulsstrom, 500mA Dauerstrom Überstromschutz Kurzschlussschutz
  • L-Band: 950 MHz to 2150 MHz
  • DVB FEC: (Auto Spectral Detection)
  • Modulation: QPSK/8PSK
  • Volle DiSeqC 2.X Unterstützung
  • DVB-C Merkmale
  • Frequenzbereich: 51-858 MHz
  • Alle Modulatios- und Codearten nach DVB-C Spezifikation
  • Symbolraten von 0,87 bis 6,9 MBaud
  • Empfindlichkeit: 47dbµV (64QAM), 47dbµV (256QAM)
  • DVB-C2 Merkmale
  • Demodulation
  • 16, 64, 256, 1024, 4096 QAM
  • 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Code Rates
  • 1/64 and 1/128 Guard Intervals
  • 8 MHz and 6 MHz channel bandwidths
  • Data Slices Types 1 & 2 supported
  • Data Slice width up to 7.61 MHz
  • Stream processor for automatic common-PLP
    and data-PLP combination
    – FEC Header Type
    – Robust mode
    – High Efficiency mode
  • Notch Support
  • Narrowband and broadband notches
  • Reception of narrow channels down to 2 MHz between broadband notches
  • Time interleaving modes 4, 8 symbols and ‚best fit‘
  • DVB-T/T2 Merkmale
  • Frequenzbereich: 49-861MHz, 2k&8k OFDM
  • Alle Modulationsarten nach DVB-T und DVB-T2 Spezifikation
  • Empfindlichkeit: -83,0dBm bei 16-QAM&3/4
  • ISDB-T Merkmale
  • Conforms to ARIB STD-B31
  • 6 MHz,7 MHz and 8 MHz BW support
  • Excellent phase noise resistance
  • Excellent multipath equalization performance
  • Automatic detection of mode/guard interval lengths
  • EWS (Emergency Warning System) flag output
  • Standard Anschlüsse
  • PCI Express
  • L-band Eingangsstecker (unterstützt eventuell benötigte Stromversorgung zum LNB)
  • IEC Buchse (Input)
  • 1 X 20 pol. Datenanschluss für differentielle Anbindung des Datenkabels (LVDS) an die OctopusNET abwärtskompatibel zum klassischen Übertragungsverfahren mit 80 MBit
  • Unicablekonform:
  • SCR / Cenelec EN 50494 (Unicable®)
  • Umweltstandards
  • RoHS Konformität
  • WEEE DE 99353762
  • Leistungsaufnahme typisch
  • DVB-T2: 8,6 Watt (worst case -80dBm QAM256 7/8)
  • DVB-C: 7 Watt
  • Hinweis: aktive Kühlung erforderlich, passive Kühlung reicht nicht aus
  • unterstützte Betriebssysteme
  • Linux (ab Kernel 2.6.34)
  • Microsoft Windows® XP (SP3)
  • Microsoft Windows® Vista
  • Microsoft Windows® 7 (32/64 Bit)
    (inkl. Windows® Media Center)
  • Microsoft Windows® 8 (32/64 Bit)
    (inkl. Windows® Media Center)
  • Microsoft Windows® 10 (32/64 Bit)
  • Systemvoraussetzungen
  • Dual Core Intel® oder AMD® CPU
  • 512 MB RAM
  • ein freier PCIe Steckplatz (x1 bis x16)
  • Abmessungen
  • H 104 mm, L111 mm, D 15 mm


Zubehör für den Einsatz in einem Einkabelsystem (Unicable I oder Unicable II/Jess®)


 

Satsplitter 4-fold (Bundle) for UniCable consist of:
1x Satsplitter 4-fold (Art. 094013)
1x High Quality SAT cable 1,5 m Quick (black) with right angel plug (Art. 094101)
2x SAT Quick-F Patch cable 30 cm Quick (Art. 094344)
2x SAT Quick-F Patch cable 50 cm Quick (Art. 094446)

Modified article - See parts list
 

Sat Splitter 4 fold with DC passthrough
for Unicable at EN50494 / EN50607
High Quality Class A
One Cable - Four Tuner - No Problem
With this Splitter on one Connector for the Standart SCR CENELEC EN50494 / EN50607

you can serve two Cine S2

Details:
directional coupler mains splitter DC Passthrough max. 24 V DC, 1A on all exits
full servicable for all Specialchannels, feedback channels
impedance: 75 Ohm
shielding:
5 - 470 MHz: > 100 dB
470 - 860 MHz: > 100 dB
950- 2500 MHz: > 100 dB

metal die-cast case in F-Technology
backflow shielding at 1750 MHz: < 14 dB
splitter shielding at 1750 MHz: 12,3 dB
TIP!
Set Artikel
TIP!
TIP!
Set Artikel
TIP!
19-inch rack installation slot for Octopus NET V2 / MC 19-inch rack installation slot for Octopus NET...
Inhoud 1 Stück (€ 0,00 / Stück)
€ 37,90 *
Laatst bekeken