Digital Devices 4 Tuner DVB-S/S2 + 2x CI Slot for PCIe (Set) - 2x DuoFlex S2 & Octopus Twin CI

€ 335,29 *

Prijzen excl. btw excl. verzendingskosten

Klaar voor onmiddellijke verzending, leveringstijd circa 1-3 werkdagen

  • 191016
Digital Devices 2x DuoFlex S2 V4A + CI Octopus Bundle - 4x DVB-S2 HDTV + 2 x CI Bundle...meer
Productinformatie "Digital Devices 4 Tuner DVB-S/S2 + 2x CI Slot for PCIe (Set) - 2x DuoFlex S2 & Octopus Twin CI"

Digital Devices 2x DuoFlex S2 V4A + CI Octopus Bundle - 4x DVB-S2 HDTV + 2 x CI

Bundle consists of: 2x DuoFlex S2 V4A (4 tuners) + double CI
2x DuoFlex S2 v4A with a full profile bracket H
including 25 cm data cable

DVB-S2 high definition satellite receiver for DVB-S2 modulated broadcasts
Recording in H.264 / H.265 format, DiSEqC 2.0 support.

DVB-S Satellite Receiver for Digital TV recording in MPEG-2 format
One cable solution to EN50494 (UniCable®) - support driver side.
The TV software used must have no UniCable® support.

Native support for Windows 7 Media Center®, SD and even HD without additional software

Signed drivers for Windows® Vista 32-bit / 64-bit signed drivers for Windows® 7 32-bit / 64-bit

Driver for Microsoft® Windows® XP with Service Pack 2, and also drivers for linux

Power supply:
Octopus S2 via PCI Express port

DuoFlex S2 via sherlock connector


DVB Standards: DVB-S, DVB-S2
Connectors: Sherlock Power, PCI Express x1, 2x Expansion Ports, 2x F-SAT In, Expansion Connector
Features: 96 MBit per CA Module, MTD Support (Multi Transponder Decryption), 2x CI Slots, Unicable I (SCR) EN50494, DiSEqC 2.x, Unicable II | JESS (SCR) EN50607, Digital TV, SD (H.262/MPEG-2), HD (H.264/MPEG-4), UHD (H.265/HEVC)
Demodulators / Channels / Tuner (Frontends): 2
Maximum Symbolrates: QPSK [67.5], 8PSK [67.5] Single Demod Use, 8PSK [45] Dual Demod Use, 8PSK [67.5] Single Demod Use, 8PSK [45] Dual Demod Use, 16APSK [67.5] Single Demod Use, 16APSK [33.75] Dual Demod Use, 32APSK [54] Single Demod Use, 32APSK [27] Dual Demod Nutzung
BBFrame Output: 1
DVB Satellite Reception Features: Short Frames, Long Frames, ACM (Adaptive Coding and Modulation), MIS (Multiple Input Streams), QPSK [1/4|1/3|2/5], QPSK [1/2|3/5|2/3|3/4|4/5|8/9|8/10], 8PSK [3/5|2/3|3/4|5/6|8/9|9/10], 16APSK [2/3|3/4|5/6|8/9|9/10], 32APSK [3/4|4/5|5/6|8/9|9/10]
DVB Cable Reception Features: N/A
DVB Terrestrial Reception Features: N/A
Driver: Windows 7, Windows 8, Windows 8.1, Windows 10, Linux
Firmware update: Update local (DVB Card)
Power consumption: ca. 3 Watt without LNB power, ca. 2 watts plus consumption of the CAM module
Power supplied: ATX Netzteil (DuoFlex), PCI Express Slot (Octopus)
Delivery Content: Device, Low Profile Bracket, Full Profile Bracket, Quick Installation Guide, Sale Packing, Driver (Online), Digital Devices TV Software (Download), Manual (Download), Power Adapter Cable (Molex 5.25 <> Sherlock ), 20 Pin Data Cable [20cm]
Operation mode - Wireing: 4x supply line from multiswitch, 4x feed line from Quad or Octo LNB, 1x feed line from SCR (Unicable I | II | JESS) via splitter
system requirements: Dual Core Intel® or AMD® CPU, 512 MB RAM, PCI Express socket (x1 - x16)
Dimension: 71.5 x 108.5 x 15 mm (Octopus Twin), 83 x 43 x 14 mm (DuoFlex)
Environmental standards and safety: RoHS Konformität, WEEE DE 99353762, CE, Without tantalum capacitors , Without electrolytic capacitors
Verdere links naar "Digital Devices 4 Tuner DVB-S/S2 + 2x CI Slot for PCIe (Set) - 2x DuoFlex S2 & Octopus Twin CI"

Octopus Twin CI single, for Digital Devices DuoFlex tuner and / or CI Module

Built-in double-CI and 2 ports for expansion modules DuoFlex or CI.

At this PCIe x1 Bridge you can connect up to 2 dual tuners (4 tuners).
Mixed operation with CI modules or S2 and CT modules is possible.
CI can be used with all other Digital Devices cards (Cine, DuoFlex and Max).
The connection works over the PCIe bus, assignment is via the Config Tool.
No special wiring or electricity required.
The Octopus Twin CI gets its power from the PCIe bus


Digital Devices DuoFlex S2 V4A - Dual DVB-S/S2 HDTV - Expansion board for Cine or Octopus series with newest demodulator (STV0910A - Improved compared to the version STV0910B) technology for high DVB-S2 transponder data rates up to 180 Mbits /s. 

Improvements of STV0910A Demodulators 

  • 16 APSK, 32 APSK
  • low QPSK code rates
  • All streams of a MIS transponder simultaneously
  • Short Frames 16KBit
  • ACM and VCM

NOTE: With the expansion module, you can upgrade an existing Cine CT (V6 or higher) or Cine S2 (V5.5 or higher) to a 4 tuner card or connect to Octopus Bridge. This expansion will delivered with a full profile bracket K and a 25 cm ribbon cable.

The TV card consists of two parts, the tuner module and the Cine (S2 or CT) TV card or Octopus series. The Cine TV Card or Octopus Bridge is in this bundle not included. The Tuner module will via ribbon cable connect to a Cine Card or Otopus Bridge and has no electrical connection to the MainBoard. The Tuner Modul requires a 3,5" Floppy Power Connector. Slotbrackets for Low und Full Profile are included.

DVB-S2 receiver for high-definition DVB-S2 channel-modulated recording in H.264 / H.265 format,
DVB-S receiver for Digital TV recording in MPEG-2 format

Signed drivers for Windows XP/Vista/7/8/8.1/10 32/64 Bit
Windows 7/8/8.1 Media Center compatible
Drivers: Linux kernel 2.6.xx current ® Open Source

Power supply: max. 0.3 Amps at 5V (power adapter depicted in the picture is not included)

Designed and manufactured in Germany


  • Octopus Twin CI
  • Slotblech Volle Bauhöhe Octopus Twin CI (vormontiert)
  • 2x DuoFlex S2 (V4A)
  • 2x Slotblech Volle Bauhöhe DuoFlex S2 (V4A) (vormontiert)
  • 2x Slotblech Halbe Bauhöhe DuoFlex S2 (V4A)
  • 2x 25 cm Datenkabel
  • 2x Sherlock <-> 5.25 Molex Stromadapter
  • 2x Sherlock <-> Sherlock Stromadapter
  • 1x Slotblech H Volle Bauhöhet (für 2x DuoFlex S2 V4A auf einem Slotblech)
  • Schnellinstallationsanleitung
  • Handbuch (online)
  • Treiber (online)
  • Software DD-TV (online)
DuoFlex S2 V4A   Octopus Twin CI
  • Satelliten Merkmale
  • Symbol Rate: 1 MSym bis 67,5 MSym DVB-S2
  • LNB Power:
    Max. 19V, 1A Pulsstrom, 500mA Dauerstrom
  • L-Band: 950 MHz to 2150 MHz
  • DVB FEC: (Auto Spectral Detection)
  • Modulation: QPSK/8PSK
  • Volle DiSeqC 2.X Unterstützung USALS
  • Standard Anschlüsse
  • 2 Eingangs F-Buchsen (IEC 60169-24)
    unterstützt eventuell benötigte Stromversorgung zum LNB
  • 20-poliger Stecker zum Anschluss an Cine DVB Karten, Bridge Module und Octopus Single/Twin CI Module
  • Standard Sherlock Power Connector für LNB – Spannungsversorgung bis max. 20 Watt
  • Unicable® konform:
  • SCR / Cenelec EN 50494
  • JESS® konform:
  • Cenelec EN 50607
  • Umweltstandards
  • RoHS Konformität
  • WEEE DE 99353762
  • Leistungsaufnahme
  • 12V / 260mA = 3,1W 2*DVB-S2
  • Stromversorgung
  • 12V only ( 9-17V )
  • unterstützte Betriebssysteme
  • Linux (ab Kernel 2.6.34)
  • Microsoft Windows® XP (SP3)
  • Microsoft Windows® Vista
  • Microsoft Windows® 7 (32/64 Bit)
    (inkl. Windows® Media Center)
  • Microsoft Windows® 8 (32/64 Bit)
    (inkl. Windows® Media Center)
  • Microsoft Windows® 10 (32/64 Bit)
  • Systemvoraussetzungen
  • Dual Core Intel® oder AMD® CPU
  • 512 MB RAM
  • ein freier PCIe Steckplatz (x1 bis x16)
  • Abmessungen
  • L 83mm, B 43mm, T 14mm
  • Standard Anschlüsse
  • PCIexpress
    Anschluss via PCIe Gen2 x1 bis x16 Steckplatz
  • Sicherheit
  • produziert und entwickelt nach europäischen Standards, DIN EN ISO 9001:2000
  • Umweltstandards
  • RoHS Konformität
  • WEEE DE 99353762
  • Leistungsaufnahme
  • < 2 Watt zzgl. Verbrauch des CAM Moduls
  • Systemvoraussetzungen
  • ein freier PCIe-Steckplatz notwendig
  • Getestete CAM Module
  • Mascom Alphacrypt Light + Easy TV
  • SMIT Irdeto/Cryptoworks
  • SMIT Viaccess mit SRG
  • Technicrypt CW mit ORF
  • SCM Cryptoworks
  • unterstützte Betriebssysteme
  • Linux (ab Kernel 2.6.34)
  • Microsoft Windows® XP (SP3)/7/8(.1)/10
    (incl. Windows® Media Center)
  • Abmessungen
  • H 71,5mm, L 108,5mm, D 15mm


Downloads zu Ihrem Produkt finden Sie hier...

Bedienungsanleitungen, Technische Zeichungen und Technische Daten als Download oder Online Version, aktuellen Treiber für Windows und Linux sowie Software und Tools.

Des Weiteren finden Sie auch Informationen zu unserem TeamViewer Quicksupport.




Set Artikel
Set Artikel
Set Artikel
Set Artikel
Set Artikel
Set Artikel
Set Artikel
Laatst bekeken