Digital Devices Octopus NET V2 19" Rack Server 1U

€ 225,00 *

Prijzen excl. btw excl. verzendingskosten

Base expansion (optional)
Extended expansion (optional)
Power cord (optional)
  • 271001
High Density Streaming Server Engine - Based on Octopus NET V2 technology. Full equipment of...meer
Productinformatie "Digital Devices Octopus NET V2 19" Rack Server 1U"

High Density Streaming Server Engine - Based on Octopus NET V2 technology. Full equipment of up to 12 tuners of different types of reception possible..

HD / UHD network tuner - IPTV head station. Unicast and Multicast Server - Certified according to SAT> IP 1.2.2 Standard


Note: This server does not contain any tuners or CI modules. Tuners and CIs that you order to this server will be installed and tested by us before delivery. An overview of possible tuners and CI components can be found in the "Accessories" tab. You will also find the different stages of expansion in the document below. If tuner or CI components are not to be installed before delivery, please give us a note in the comments on your order.


 The Streaming Server can be equipped with up to 12 tuners and is delivered with Octopus NET Mainboard for the direct connection of the corresponding modules (Tuner / CI) in a 1U housing of the company Inter-Tech, which was been especially adapted for the Octopus NET serverboards.

Octopus NET SAT>IP mainboard

Digital Devices Octopus NET mainboard for Unicast (RTSP) according SAT>IP and Multicast (RDP / UDP) according MPTS
Power supply 220 Volt

The SAT> IP server for manual configuration. The selection of the tuner modules is freely selectable within the scope of the possible slots and configuration. A detailed overview of which modules can be used can be found in the following connection diagram:

download Connetion shema - Octopus NET mainboard for SAT>IP

The Octopus NET Mainboard will modularly extended and allows a change of the installed receiving modules or extension. When changing locations, the Octopus NET can be adapted or extended at any time by exchanging these modules in the reception situation.

The Octopus NET Server Mainboards for SAT>IP can be configured for Unicast MPTS (RTSP Protocol) and Multicast MPTS (RTP / UDP Protocol) and are certified according to the SAT>IP standard and can be used with numerous software and hardware clients.

TVs from Panasonic with SAT> IP support, support directly the Octopus NET servers for all DVB reception types such as cable, terrestrial and satellite and are also suitable according to the MPTS method multicast. In the MPTS process, individual services as well as complete transponders can be sent to the client via a single stream, providing an ideal solution for hotels, residential applications, etc.

By installing a CI Slots, multicast and unicast streams can be decrypted* directly in the server.
(* Please note the terms and conditions of the PayTV / Content providers listed in your contract for use of the content.) The CI of the Octopus NET is not part of the SAT> IP specification and is therefore not supported by every client.

The built-in 5 port GigaBit Switch not only extends your network through additional LAN ports; you can also define the streams that are available on the ports in multicast mode. The Switch can also be used as an IGMPv3 Querrier.

With the help of SAT> IP Apps or Players, you can look anywhere on your mobile device in your WLAN network wherever you want or where no coaxial cable can be installed or moved. SAT> IP Set Top Boxes are available for this purpose from many manufacturers. When choosing the client, make sure that it supports the reception modes of the Octopus NET server.


Dimensions Server Case (LxWxH) in mm:  445 x 482 x 278

 

Verdere links naar "Digital Devices Octopus NET V2 19" Rack Server 1U"
  • 19" Servergehäuse 1HE
  • Octopus Net Board
    (4 freie Erweiterungsports für DuoFlex Tuner und CI Erweiterungen und 1 freier PCIe Port für Max Karten)
  • mini ITX Rückblende
  • mini ITX Grundplatte
  • Befestigungsbrücke (für maximal 4x DuoFlex oder 1x Max Karte + 2x DuoFlex Erweiterungen)
  • 4x 25 cm Stromadapter (Octopus Net Board zu den DuoFlex Erweiterungen)
  • Montagekit (Schrauben, Stehbolzen)
  • Netzteil 15 Volt

Digital Devices MAX SX8 Basic (DVB-S2 / DVB-S2X 4/8) comes with 8x DVB-S/S2/S2X tuners on only one PCI Express card. With the Digital Devices MAX SX8 Basic Digital Devices presents an HDTV tuner card for the PCI Express slot with eight TV tuners. The ultra-compact design, only 5 watts power consumption, the choice of operating mode and support for the single-cable solutions according EN50494 (Unicable®)*1 and EN50607 (JESS®)*2, allows a flexible use in any situation and for any solution. 

Suitable on Windows XP, Windows Vista, Windows 7, Windows 8(.1), Windows 10 and Linux, the Digital Devices MAX SX8 Basic can be integrated by flexible selection of the operating mode individually in the environment. The operating modes allows a single-cable mode according to EN50494 (Unicable®)*1 and EN50607 (JESS®)*2, the use of quad LNBs and 4 lines from multi-switches and Quattro LNB's or master output of a multiswitch.

Operation Mode Quad LNB or 4 Multiswitch Outputs

Use this option if you want to connect your Max SX8 Basic to a normal multiswitch or LNB with integrated multi-switch (QUAD LNB or OCTO LNB). For both cases, four SAT lines are required to provide a full-featured and full reception (all four levels SAT).

 

Operation Mode Quattro LNB or Multiswitch cascade output (VL, VH, HL, HH)

Use this option if you want to connect your Max SX8 Basic to a multi-switch, which can be cascaded. Such multi-switch have in addition to the inputs for a Quattro LNB, four outputs which are also known as "cascade outputs". These outputs give only from a Quattro LNB received signals unaltered out again. Alternatively, the four outputs can be directly used by a Quattro LNB without multiswitch.

 

Operation Mode Singlecable Solution

in this operation mode the card can be used over only one antenna cable via Unicable®*1 oder JESS®*2 supported equipment. Thereby it is possible to provide up to 8 Tuners by a UniCable® System and up to 32 Tuners with a JESS® System. More than one satellite can be used in this mode (in this mode, you need for 8 tuners only 1 cable to port 1, thanks to an integrated multi-switch).

 

Operation mode 4 Tuner Direct

In the "4 Tuner" operating mode, the four inputs of the card can be used like individual tuners. Several satellites (DiSEqC) are supported in this mode. (In this mode you need 1 to 4 cables from a multi-switch or LNB with integrated multi-switch)

The Digital Devices MAX SX8 Basic can be used immediately with numerous TV applications.

 

* 1 Unicable® Requires Unicable® / SCR / CENELEC EN50494 compliant LNB or multiswitch to EN50494
* 2 JESS® Requires Jess® / CENELEC En50607 compliant LNB or multiswitch to En50607

 

Digital Devices MAX SX8 (DVB-S2 / DVB-S2X 4/8) comes with 8x DVB-S/S2/S2X tuners on only one PCI Express card. With the Digital Devices MAX SX8 Digital Devices presents an HDTV tuner card for the PCI Express slot with eight TV tuners. The ultra-compact design, only 5 watts power consumption, the choice of operating mode and support for the single-cable solutions according EN50494 (Unicable®)*1 and EN50607 (JESS®)*2, allows a flexible use in any situation and for any solution.

Suitable on Windows XP, Windows Vista, Windows 7, Windows 8(.1), Windows 10 and Linux, the Digital Devices MAX SX8 can be integrated by flexible selection of the operating mode individually in the environment. The operating modes allows a single-cable mode according to EN50494 (Unicable®)*1 and EN50607 (JESS®)*2, the use of quad LNBs and 4 lines from multi-switches and Quattro LNB's or master output of a multiswitch.

Operation Mode Quad LNB or 4 Multiswitch Outputs

Use this option if you want to connect your Max SX8 to a normal multiswitch or LNB with integrated multi-switch (QUAD LNB or OCTO LNB). For both cases, four SAT lines are required to provide a full-featured and full reception (all four levels SAT).

 

Operation Mode Quattro LNB or Multiswitch cascade output (VL, VH, HL, HH)

Use this option if you want to connect your Max SX8 to a multi-switch, which can be cascaded. Such multi-switch have in addition to the inputs for a Quattro LNB, four outputs which are also known as "cascade outputs". These outputs give only from a Quattro LNB received signals unaltered out again. Alternatively, the four outputs can be directly used by a Quattro LNB without multiswitch.

 

Operation Mode Singlecable Solution

in this operation mode the card can be used over only one antenna cable via Unicable®*1 oder JESS®*2 supported equipment. Thereby it is possible to provide up to 8 Tuners by a UniCable® System and up to 32 Tuners with a JESS® System. More than one satellite can be used in this mode (in this mode, you need for 8 tuners only 1 cable to port 1, thanks to an integrated multi-switch).

 

Operation mode 4 Tuner Direct

In the "4 Tuner" operating mode, the four inputs of the card can be used like individual tuners. Several satellites (DiSEqC) are supported in this mode. (In this mode you need 1 to 4 cables from a multi-switch or LNB with integrated multi-switch)

The Digital Devices MAX SX8 can be used immediately with numerous TV applications.

 

* 1 Unicable® Requires Unicable® / SCR / CENELEC EN50494 compliant LNB or multiswitch to EN50494
* 2 JESS® Requires Jess® / CENELEC En50607 compliant LNB or multiswitch to En50607

 

HD / UHD Octo-Tuner - 8 Tuner - TV card for DVB-C / C2, DVB-T / T2 or  ISDB-T  for the PCI Express slot.

With only one cable Ideal for construction of multimedia PCs and media center systems in the home as well as streaming and recording server for data analysis in the professional field.

The Max A8i is equipped for the reception of transmitters which via DVB-C / C2, DVB-T / T2 (Digital cable or terrestrial) or ISDB-T are disseminated and used for displaying, recording and analysis of MPEG2 (SD / HD H.262) MPEG4 (SD / HD H.264) and HEVC (HD / UHD H.265) signals.

The Max A8i is equipped at the factory with 8 full tuners (Octo Tuner Technology). So you have the option of eight different transponders to receive at the same time. For example you can use this feature to receive up to eight different digital cable or digital terrestrial transponders (frequencies) at same time for recording or streaming multiple channels and watch one or Handle multiple other. Since each tuner works independently are all data from the transponders available.

The Max A8i supports Onecable solution, so that only one supply line to the card is required to supply all the 8 internal tuner.

The Digital Devices MAX A8i can be expanded with an Octopus single CI or Octopus Twin-CI Card over an additional PCIe. Of course also a Flex / DuoFlex-CI device which is connected to a Cine or Octopus Bridge can be used.

Due to the installation height of Full-profile, the Max A8i can fits exclusively in Full profile housing (housing with full-height).

The power consumption is at only 13-16 watts during normal operation (depending on the reception mode).

Please note that for the operation of the card your PC case requires an active cooling.

Drivers are available for the Windows operating system, Windows Server and Linux available for download.

This product was developed and produced in Germany

 

Digital Devices Max M4 Multituner TV Card - the all-rounder for satellite, cable or terrestrial reception

A 4-fold multi-band tuner HD TV Card / Tuner Card for the PCIe Slot for the following reception types:

  • DVB-S(satellite tuner)
  • DVB-S2 (satellite tuner)
  • ISDB-S (satellite tuner)
  • DVB-C (cable tuner)
  • DVB-C2 (cable tuner)
  • ISDB-C (cable tuner)
  • J.83 (cable tuner)
  • DVB-T(terrestrial tuner)
  • DVB-T2 (terrestrial tuner)
  • ISDB-T (terrestrial tuner)

The Digital Devices Max M4 is a multi-tuner TV card. It has the capabilities of digital reception for satellite (DVB-S / S2 / ISDB-S), cable (DVB-C / C2 / ISDB-C / J.83) or terrestrial (DVB-T / T2 / ISDB-T).

The reception of SD to Ultra HD modulated channels on the transponders of the provider is no problem for the M4. Due to the low power consumption of ~ 7 watts, the card works very economically. The Max M4 Multituner card comes in Full Profile Format (full height) with corresponding bracket.

The choice of reception is done dynamically. The Max M4 has four individual front ends, depending on the tune request, the card switch automatically to a free cable, satellite or terrestrial tuner. Through the dynamically switching, a reprograming of the receiving mode during operation is not needed. Thus a DVB-C or DVB-T2 connection can be used for bad weather alternative with disturbed SAT reception, in order to keep a running operation.

Receive stations from different sources, such as SAT and terrestrial, without investing in different receiving systems. If not only satellite, but also cable TV should to be received at a location(for example for local channels), this is now possible without any problems with the Max M4.

For operation with a standard satellite receiving system (star cabling), you need a cable for each DVB-S tuner to the Max M4, thus also the card can be used with full DiSEqC support. Likewise, the use of Unicable I (EN50494) and Unicable II / JESS (EN50607) systems is easily possible. To supply the individual SAT tuners with a Unicable signal, the SAT inputs of the card are connected to the Unicable system by a Unicable splitter.

For operation on a cable provider or terrestrial antenna, only one cable from the DVB-C wall socket or antenna is needed. The signal is internally distributed to the tuner, thus no splitter parts are needed.

In the field of data analysis, you now receive the data from one source from different reception types, e.g. Advertising analysis, time offset, data rate of individual transmissions. Also the dynamic switching of the required reception type offers advantages, becuase a changing is immediately possible.

The hardware design of the card allows an operation in the 24/7 envoirement for professional and home use. Thanks to the use of high-quality components, such as ceramic capacitors and the absence of environmentally hazardous substances, the Max M4 ensures a long lifetime even with permanent use of the hardware.

The Digital Devices Max M4 can be extended with an Octopus Single-CI or Octopus Twin-CI card via an additional PCIe slot and of course also other connected Flex-CI modules from Digital Devices can be used.

Drivers for Windows XP, Windows 7, Windows 8 (.1) as well as Windows 10 and Linux.


* 1 Unicable® Requires Unicable® / SCR / CENELEC EN50494 compliant LNB or multiswitch to EN50494
* 2 JESS® Requires Jess® / CENELEC EN50607 compliant LNB or multiswitch to EN50607

 

 

 

Digital Devices DuoFlex S2 V4A - Dual DVB-S/S2 HDTV - Expansion board for Octopus NET with newest demodulator (STV0910A - Improved compared to the version STV0910B) technology for high DVB-S2 transponder data rates up to 180 Mbits /s. 

Improvements of STV0910A Demodulators 

  • 16 APSK, 32 APSK
  • low QPSK code rates
  • All streams of a MIS transponder simultaneously
  • Short Frames 16KBit
  • ACM and VCM 


Ideal for expanding two Tuner Octopus NET systems. This version of the DuoFlex expansion module comes with a suitable power adapter and data cable. A slot plate for the installation in the PC is not included.

Designed and manufactured in Germany

Twin Common Interface extension modul for the Cine-, Octopus- and Octopus NET series

The DuoFlex CI extension provides two CI slots. The DuoFlex CI can be used for products of the Cine, Octopus and Octopus NET series. The DuoFlex CI is used to hold two Conditional Access Modules (CAM). Some CAMs master Multi Transponder Decrypting (MTD) technology, which allows up to 4 TV channels / tuners to be decrypted using just one CAM (number depends on manufacturer).

The common interface extension is connected to the base card using a ribbon cable. In addition, it's powered by the supplied power adapter. Thanks to the supplied low-profile and full-profile slot plates, individual installation is possible.

 

What is a Common Interface (CI)?
CI-LogikA conditional access module (CAM) is inserted into a common interface interface (also known as a CI slot). The smart card of a content provider is then inserted into this CAM. If all components are matched to one another, the TV signal can be decrypted.

 

Twin CI with MTD
The Twin Common Interface on the OctopusCI S2 Pro provides the system with two CI slots and is designed to use with two Conditional Access Module (CAM). Some CAMs handle the Multi Transponder Decrypting (MTD) technology, which allows up to 4 TV channels / tuner only a CAM (number dependent on the manufacturer) to decrypt. 

What is Multi Transponder Decrypting (MTD)?
Multi Transponder Decrypting is a new technology that allows to decrypt up to 4 TV channels / tuner simultaneously with only one Conditional Access Module (number of channels dependent on the manufacturer).

TV software
All Digital Devices products are supplied with the DD-TV software. Experience the numerous functions: HD quality television, time-shift television, digital video recorder, electronic program guide (EPG), teletext reception.

Support – Operating systems and Software
Signed Drivers for Microsoft ® Windows ® XP with Service Pack 2, Windows Vista ® 32-bit / 64-bit, Windows 7/8/8.1/10 ® 32-bit / 64-bit
Windows 7/8/8.1 Media Center compatible
Drivers: Linux kernel 2.6.xx current ® Open Source

Compatible with Windows Media Center
Our products are under the Windows Media Center, including the optional direct support of the CI interfaces, immediately usable without complications.

 

download   Download Funktionsübersicht Octopus NET v2 System
  • Empfang
  • bis zu 12 Tuner DVB – S/S2 ( MaxS8 + 2* DuoFlex S2 V4, kein CI )
  • bis zu 12 Tuner DVB – C/ C2 oder DVB-T/ T2 ( MaxA8 + 2* DuoFlex C2T2, kein CI )
  • bis zu 4 Common Interface
  • Streamingengine
  • 12 Singlecast Clients (unabhängig von der Anzahl der angeschlossenen Tuner)
  • Streaming von 12 vollen Transponder
  • RTP Streaming mit sehr geringer Latenz
  • UDP Streaming mit sehr geringer Latenz
  • sehr geringer Jitter
  • gleichmäßige Netzwerkauslastung keine Übertragungsspitzen und Senken
    Hinweis: verbessert die Qualität einer WLAN Übertragung deutlich
  • vollständige Hardware Filterung für alle PIDs ( keine Bergrenzung )
  • SAT>IP (Version 1.2) für 12 Singlecast Clients und/ oder max 12 Multicast Streams
  • flexible Konfiguration Singlecast und / oder Multicast
  • Eingebauter Netzwerk Switch
  • 5 Port managed GigaBit-Switch
  • 5x 10/100/1000
  • Ethernet Protokolle IPv4 und IPv6
  • Quality of Service, Audio Video Daten haben Priorität
  • 8192 MAC Addressen
  • 4 Klassen Priorität für QOS gemäß IEEE802.1q
  • IP Filterung
  • Weitere Highlights
  • sehr geringe Energieaufnahme
  • sehr geringe Standby Energieaufnahme
  • Open Source Software

 

Card features Max SX8 Max SX8 Basic Max S8 Max M4 DuoFlex S2 V4A
Demodulators/Channels 8 8 8 4 2
Inputs 4 4 4 4 2
BBFrame Output 1 0 0 0 1

 

Maximum Symbolrates Max SX8  Max SX8 Basic Max S8 Max M4 DuoFlex S2 V4A 
QPSK ~95  |1|4| 64.58 45 46   67.5  
8PSK/8APSK 86
|1|4| 64.58 45  46   67.5/45 |5|
16APSK 64.5
|4|     34.5  |3|  67.5/33.75 |5|
32APSK 51.6
|4|      34.5  |3| 54/27 |5|
64APSK 43
|4|            
128APSK 36.85
|4|            
256APSK 32.25 |4|            
Annex M 500 |4|            


1) Symbolraten wurden bis 85 MSymbols/s getestet
2) derzeit noch nicht implementiert
3) 16APSK, 32APSK möglich aber 4dB Einbruch in der Leistung
4) Maximale DVB-S2 / S2X LDPC-Bitrate ist auf 720 Mbit / s begrenzt. Diese Bitrate ist definiert als Symbolrate * Bits / Symbol, d.h. 8PSK 30 M Symbole = 90 Mbit / s. Die verwendete Bitrate wird vom Treiber dynamisch zugewiesen. DVB-S-Kanäle tragen nicht zum Limit bei.
5) Single / Dual Demod Nutzung

 

DVB-S2/S2X Features Max SX8 Max SX8 Basic Max S8 Max M4 DuoFlex S2 V4A
Short Frames
     
Long Frames
ACM (Adaptive Coding and Modulation)      
MIS (Multiple Input Streams)      
Annex M     •  |2|        
Channel Bonding (S2X)     •  |2|        
QPSK 1/4,1/3,2/5  
QPSK 1/2,3/5,2/3,3/4,4/5,8/9,8/10
QPSK 13/45,9/20,11/20      
8PSK 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
8PSK 23/36, 25/36, 13/18      
8APSK-L 5/9, 26/45      
16APSK 2/3, 3/4, 5/6, 8/9, 9/10     •  |3|
16APSK 26/45 3/5, 28/45, 23/36, 13/18, 7/9, 77/90        
16APSK-L 5/9, 8/15, 1/2, 3/5, 2/3        
32APSK 3/4, 4/5, 5/6, 8/9, 9/10     •  |3|
32APSK 32/45, 11/15, 7/9        
32APSK-L 2/3        
64APSK 11/15, 7/9, 4/5, 5/6        
64APSK-L 32/45        
128APSK 3/4, 7/9        
256APSK 32/45,3/4        
256APSK-L 29/45, 2/3, 31/45, 11/15        
VL-SNR          
Maximale Baudrate von 500 Mbit/s        
bis zu 2 slices        
Fehlerkorrektur: LDPC 720 Mbit/s          
Maximale DVB-S2/S2X LDPC-Bitrate
für alle 8 Tuner ist 720 MBit/s.
     
VCM (Variable Coding and Modulation)        


2) derzeit noch nicht implementiert
3) 16APSK, 32APSK möglich aber 4dB Einbruch in der Leistung

 

Home

Stream Status

Tuner Status

Unicable

Set Artikel
TIP!
TIP!
Digital Devices 19-inch rack installation slot for Octopus NET V2 / MC Digital Devices 19-inch rack installation slot...
Inhoud 1 Stück (€ 0,00 / Stück)
€ 37,90 *
Set Artikel
TIP!
Set Artikel
TIP!
Set Artikel
TIP!
Set Artikel
TIP!
Set Artikel
TIP!
Set Artikel
TIP!
Set Artikel
TIP!
Set Artikel
TIP!
Set Artikel
TIP!
Astra Cesbo Lifetime licence voucher Astra Cesbo Lifetime licence voucher
€ 475,20 * € 528,00 *
Set Artikel
TIP!
Laatst bekeken