Unicable II Multiswitch - 8x16 Unicable II / Legacy / Terrestrial - IDLU-UST110-CUO8O-32PP 5458

€293.28 *

Prices plus VAT and shipping costs
(The charging VAT is only calculated on delivery to end customers in the EU Member States)

Ready to ship today,
Delivery time appr. 2-5 workdays europe

  • 955458
The IDLU-UST110-CUO8O-32PP is a small size casacdable Unicable II multiswitch with 8... more
Product information "Unicable II Multiswitch - 8x16 Unicable II / Legacy / Terrestrial - IDLU-UST110-CUO8O-32PP 5458"
The IDLU-UST110-CUO8O-32PP is a small size casacdable Unicable II multiswitch with 8 auto-detect output ports, each supporting Unicable II or Legacy functionality.
 
The Multiswitch unit can be connected to a single satellite Quattro LNB (default configuration) or two Wideband LNBs to support reception of 2 satellites. A Terrestrial input allows to connect a terrestrial antenna for reception of UHF/VHF/DAB/radio broadcasts. The terrestrial signal can be amplified (ON/OFF switch) and is combined over each of the 8 output ports. By default, each output port functions in Legacy mode and can be controlled through 13/18V+0/22kHz signals or DiSEqC1.0/2.0 commands. The port switches to Unicable II mode automatically upon receiving a EN50494/EN50607 command and provides 16x dynamic User Bands (refer to the product technical specifications for the default settings of the 16 user bands).

The Multiswitch unit can be powered through a DC input port, any of the trunk output lines or from the STB output ports (typically through a power inserter device). In typical cascaded MDU installations, the DC voltage supplied over the DC in or trunk output lines is passed through to the trunk input lines in order to power the LNB and the ‘STB DC pass to LNB trunk’ switch must be set to OFF. To help the installer ensure at the time of installation that the unit’s power supply is sufficient to support a full load in the future, the Multiswitch features a special power diagnosis test mode that is triggered automatically upon unit startup. During this 15 second test, the Multiswitch will operate in full load and will light a power-diagnosis led in green if the unit is supplied with sufficient power or in amber if not.
A status led, located next to each of the output ports, indicates the operating mode of the port (Legacy=solid green, Unicable II=blinking green, Power diagnosis=blinking red/green).

For Indoor and outdoor (IP54) installations
* Programmer not included, sold separately as an optional accessory

 

Type: Multiswitch
Connect to LNB: Quattro, Wideband
Unicable Standard: EN50494, EN50607
Userbands: 4x 16 Userbands
Programable: Ja
Unicable Outputs: 4x Unicable / Legacy (Switched)
Legacy Outputs: 4x Unicable / Legacy (Switched)
Power consumption: 600 mA ~ 900 mA @10 VDC ~ 20 VDC max.
Additional PSU needed: 18 Watt Netzteil direkt, 65 Watt Netzteil (Bei Kaskadierung), Power Inserter 18 Watt Netzteil
Related links to "Unicable II Multiswitch - 8x16 Unicable II / Legacy / Terrestrial - IDLU-UST110-CUO8O-32PP 5458"
Technical specifications
Frequency range: satellite Quattro LNB: 950 MHz ~ 2150MHz (default)
Wideband LNB: 300 MHz ~ 2350MHz
Frequency range: terrestrial 47 MHz ~ 862 MHz
Inputs 4x IF inputs: 
- From 1x Quattro LNB (default) 
- From 2x Wideband LNBs
1 x UHF/VHF input from Terrestrial antenna
Outputs 4x Loopthrough satellite IF outputs*
1x Loopthrough terrestrial output

8x auto-detect Unicable II / Legacy output ports with combined
errestrial signal. Default behavior: Legacy mode on power up,
auto-switch to Unicable II dynamic mode upon receiving an
EN50494/EN50607 command.
Input power range -50 dBm ~ -5 dBm
Output signal level (AGC) -25 dBm (83 dBuV)
RF isolation: satellite/terretsrial (input) 30 dB min.
RF isolation: satellite/satellite (input) 30 dB min.
RF isolation: satellite ch/ch (UBs, output) 30 dB min.
Loop-through loss: satellite 4dB max. (loss)
Loop-through loss: terrestrial 8 dB @ 400~600 MHz (12 dB max.) (loss)
[amplification=OFF]
+11 dB @400~600 MHz (+7 dB min.) (gain)
[amplification=ON]
Gain: Unicable II™ (dCSS) output (out of AGC) 25 dB min.
Gain: terrestrial signal -19 dB @ port 4 over 400~600MHz (-25 dB min.)
[amplification = OFF]
+1 dB @ port 4 over 400~600MHz (-9 dB min.) 
[amplification = ON]
* 1dB difference between adjacent ports, -1 dB from port 1 through to port 8
Integrated phase noise 1.5° max.
Control protocols EN50494 (SatCR), EN50607 (dCSS), DiSEqC1.0/2.0,
13 V/18 V + 0 kHz/22 kHz
Legacy port switching V/L => 13 V/0 kHz , V/H => 13 V/22 kHz
H/L => 18 V/0 kHz , H/H => 18 V/22 kHz
Input/Output impedance 75 Ω (F-type)
LNB power supply 500 mA max. @ 18 VDC
Power consumption 1200 mA @ 19 VDC (no load)
Working temperature -20 °C ~ +50 °C
IP protection IP54
Product dimensions (W x D x H) 210 mm x 146 mm x 3.7 mm
Weight 500 g
Unicable II™ (dCSS) port specifications
User band (channel) bandwidth 46 MHz, programmable 10 MHz ~ 80 MHz
User band (channel) gain ripple 3 dB max.
User band (channel) frequencies Default Unicable II™ dynamic user bands per output port: 
  CH1: 1210MHz EN50607+EN50494 (dCSS+SatCR)       
  CH2: 1420MHz EN50607+EN50494 (dCSS+SatCR)
  CH3: 1680MHz EN50607+EN50494 (dCSS+SatCR)
  CH4: 2040MHz EN50607+EN50494 (dCSS+SatCR)
  CH5: 985MHz EN50607+EN50494 (dCSS+SatCR)
  CH6: 1050MHz EN50607+EN50494 (dCSS+SatCR)
  CH7: 1115MHz EN50607+EN50494 (dCSS+SatCR)
  CH8: 1275MHz EN50607+EN50494 (dCSS+SatCR)
  CH9: 1340MHz EN50607 (dCSS)
  CH10: 1485MHz EN50607 (dCSS)
  CH11: 1550MHz EN50607 (dCSS)
  CH12: 1615MHz EN50607 (dCSS)
  CH13: 1745MHz EN50607 (dCSS)
  CH14: 1810MHz EN50607 (dCSS)
  CH15: 1875MHz EN50607 (dCSS)
  CH16: 1940MHz EN50607 (dCSS)
  * Unused ports need to be terminated by 75 Ohm DC-blocked terminators
Unicable II™ (dCSS) port specifications
User band (channel) bandwidth 46 MHz, programmable 10 MHz ~ 80 MHz
User band (channel) gain ripple 3 dB max.
User band (channel) frequencies Default Unicable II™ dynamic user bands per output port: 
  CH1: 1210MHz EN50607+EN50494 (dCSS+SatCR)       
  CH2: 1420MHz EN50607+EN50494 (dCSS+SatCR)
  CH3: 1680MHz EN50607+EN50494 (dCSS+SatCR)
  CH4: 2040MHz EN50607+EN50494 (dCSS+SatCR)
  CH5: 985MHz EN50607+EN50494 (dCSS+SatCR)
  CH6: 1050MHz EN50607+EN50494 (dCSS+SatCR)
  CH7: 1115MHz EN50607+EN50494 (dCSS+SatCR)
  CH8: 1275MHz EN50607+EN50494 (dCSS+SatCR)
  CH9: 1340MHz EN50607 (dCSS)
  CH10: 1485MHz EN50607 (dCSS)
  CH11: 1550MHz EN50607 (dCSS)
  CH12: 1615MHz EN50607 (dCSS)
  CH13: 1745MHz EN50607 (dCSS)
  CH14: 1810MHz EN50607 (dCSS)
  CH15: 1875MHz EN50607 (dCSS)
  CH16: 1940MHz EN50607 (dCSS)
  * Unused ports need to be terminated by 75 Ohm DC-blocked terminators
Icon_ExLink Specification PDF English 
Icon_ExLink  Installationguide PDF English
Poweradapter 65W
Unicable II Multischalter - 8x16 Unicable II / Legacy / Terrestrisch - IDLU-UST110-CUO8O-32PP 5458
65W Netzteiladapter für Unicable II Multischalter - IDLU-ADPT03-19342-OPP 5423
€318.49 * Instead of €326.81 *
Price for all:

Open bundle

An error occurred while saving the bundle configuration.
Unicable II Multiswitch - 8x16 Unicable II / Legacy / Terrestrial - IDLU-UST110-CUO8O-32PP 5458
- inverto -   €293.28 *
Ready to ship today,
Delivery time appr. 2-5 workdays europe
65W Power supply for Unicable II multiswitches - IDLU-ADPT03-19342-OPP 5423
- inverto -   €33.53 *
Ready to ship today,
Delivery time appr. 2-5 workdays europe
Hint!
Hint!
Hint!
19-inch rack installation slot for Octopus NET V2 / MC 19-inch rack installation slot for Octopus NET...
Content 1 Stück (€0.00 / Stück)
€37.90 *
Viewed