Prices plus VAT and shipping costs
(The charging VAT is only calculated on delivery to end customers in the EU Member States)
Ready to ship today,
Delivery time appr. 2-5 workdays europe
Delivery time 3 Workdays
- Order number: 171206
|Cable for High Power LNBs|
|Additional Tuner | CI Slots|
|Ribbon cables special length|
HD / UHD Twin Tuner TV Card for DVB-S/S2 and digital SAT-Radio for the PCI Express Slot. Suitable for high resolution transponder thanks to the latest demodulator technology (STV0910A - Impoved Version compared to STV0910B ) for high DVB-S2 transponder data rates up to 180 Mbits/s.
Improvements of STV0910A Demodulators
- 16 APSK, 32 APSK
- low QPSK code rates
- All streams of a MIS transponder simultaneously
- Short Frames 16KBit
- ACM and VCM
Ideal for the construction of multimedia PCs and media center systems in home as well as streaming and recording server for data analysis in the professional field.
The Cine S2 V7A is equipped to receive channels which are disseminated via satellite (DVB-S and DVB-S2 transponders) and can be used for displaying, recording and analysis of MPEG2 (SD / HD H.262) MPEG4 (SD / HD H.264) and HEVC (HD / UHD H.265) signals.
The Cine S2 V7A is equipped from factory with 2 full tuners (twin tuner technology). So you have the possibility to receive two different transponders at the same time. Use this feature to receive two different satellite transponders (frequencies) simultaneously, for example to record a channel and watch another one. Each tuner works independently, so are all data from the transponders available.
Over the OnBoard Located Expansion Ports (3x), the card can at any time to expand via expansion modules. For example, use Twin Tuner expansion modules, the raise up the card to 8x full Tuner by using only one PCI Express slot.
How all Digital Devices products, also the Cine S2 V7A supports Singlecable Reception - UniCable to EN50494 and UniCable II / Jess to EN50607. Under Windows it is directly supported by driver, so that each application can be used. In Linux OS, the corresponding application must control the single-cable method.
Through the use of high quality components, the Cine S2 V7A ensures a long life even in 24/7 server operation.
Through the small dimensions of the Cine S2 V7A, its can be mounted in low and full profile PC cases (PCs with low and full-height).
The power consumption without LNB power at only 3 watts in full operation and works on the GreenIT standard. About the OnBoard located Molex - Sherlock power plug, can optionally Satellite systems, which need a large amount of current via the coaxial cable, an extra power (By default, not required). Also expansion modules can directly be supplied with power over this port. Corresponding power cables, see accessories.
Drivers are available for Windows operating systems, Windows Server and Linux for download.
This product was developed and produced in Germany and has strict controls in the area of quality and environment protection and is free from environmentally hazardous substances, like electrolyte or tantalum capacitor.
|Anschluss via:||PCI Express|
|Digital TV Radio Empfang:||Ja|
|Einkabelbetrieb:||JESS | Unicable II (EN50607), Unicable I (EN50494)|
|Stromverbrauch:||ca. 3 Watt ohne LNB|
|Stromversorgung:||Über Netzteil und PCIe Slot|
|Linux / Windows Treiber:||Ja|
Q: Can I use the card together with a CI Slot ?
A: Yes, the card can be equipped directly over a free expansion port with CI slots (DuoFlex CI) or an additional over PCI Express slot (Octopus CI)
Q: Can I receive with the card also UHD channels?
A: Yes, for the transmission of UHD channels, the standard DVB-S2 transponders are currently used. To display UHD material a corresponding graphics hardware and a HEVC decoder is required. Supported transponder are with a symbol rate of up 67,5 MSym/s (symbol rate = 67500) – up to 180 MBits.
Q: I have only one satellite cable, I can use both tuners card anyway?
A: For the reception of DVB-S/S2 a satellite line can not be split easily, because there are 4 different reception levels on which a tuner has to move. In order to obtain the appropriate SAT level, a control signal to the SAT multiswitch or LNB is sent, which then provides the appropriate level. If a SAT line split, both tuners at the same SAT level must be located so that a reception is possible. If you have available only one satellite cable, possibly would be the extension to UniCable an option, talk to us, we will advise you.
Q: Requires the Card an additional power supply?
A: No, unless you have SAT components in use, which need much power and so the PCIe power is no longer sufficient. In this case, via the Molex - Sherlock power connector on the card additional power can provided by the computer power supply
Q: Can I use the power connector on the card for the supply of expansion modules?
A: Yes, the Power to the Cine card can be used to supply additional CI or Tuner modules, under the condition that the PCIe power is sufficient to supply those systems (in most cases). Corresponding power adapters see Accessories -> data cable and power adapter
Q: The card has a PCIe x1 socket (short), can I put this also in a PCIe X16 (long) slot on the Mainboar, e.g. where the graphics card is plugged?
A: Yes, the card can be operated in all PCIe slots PCIe x1 - x16
Q: In format the card records?
A: The card provides only the data from the stations which are processed by a software. The recording format is depended by used the application.
Q: Is it possible to receive radio stations with the card?
A: Yes, but the radio signal must broadcast compliant to DVB. DAB is not possible !
- Sales packaging
- Cine card
- Bracket Full Height (premounted)
- Bracket Half Height
- Quick Installation Guide
- Manual (online)
- Drivers (online)
- Software DD-TV (online)