Digital Devices Octopus NET v2 A8i Max - SAT>IP Networktuner

This product is currently not available.
€503.36 *

Prices plus VAT and shipping costs
(The charging VAT is only calculated on delivery to end customers in the EU Member States)

Delivery time 5 Workdays

  • 291058
The High-End Networktuner - Octopus Net v2 - A8i Max 8 Tuner   The Octopus Net... more
Product information "Digital Devices Octopus NET v2 A8i Max - SAT>IP Networktuner"

The High-End Networktuner - Octopus Net v2 - A8i Max 8 Tuner

 

satip-logikThe Octopus Net is streaming LiveTV to IPTV-Ready devices in the local network. It makes so many devices to a FullHD (*1) receiver for satellite television and cable television. Thereby will send the FTA Channels (*2) in FullHD in the LAN or WLAN Network. Up to 12 streams over 8 Tuner - depending on model - may be used simultaneously on stationary and mobile devices. The to-use client software (*3) is for the operating systems iOS (iPhone, iPad), Android, Mac OS and Windows already from various manufacturers available on the market (Smart TVs, Windows Phone, Windows RT and Kindle Fire HD in preparation).

All models in the Octopus Net series contains a 5 port gigabit managed switch. The Octopus Net can be any number of times cascaded (controlled by IP address). Power is supplied by an external power supply (rack version also possible internally). The use of wireless clients requires an additional wireless access point.The devices Octopus NET MAX use active cooling (fan) which temperature controlled works.

*1 Full HD ready, depending on the client
*2 CI support
*3 possibly charged (the current list below: www.satip.info)

Due technical reasons, the MTD function is not available for this device.

The model Octopus NET V2 A8i Max - 8 Tuner includes eight DVB-C/C2/T/T2 tuner over 1 port. Configuration is done via web interface, a firmware update is carried out via LAN / Internet when needed. The connectivity options are the following in this model: 

  • Direct connection to DVB-C (Cable) or DVB-T (Terrestrial) over one cable.

 

 Testberichte-onet55dda77597d64

 

 

SATIP2

 
To use the network tuner you need a client software or a hardware client for your system environment. The IPTV client software for the protocol SAT> IP can be paid for, a list of usable products, see http://www.satip.info.
 
 
SAT>IP Standard: nach V 1.2
HDTV (H.264/H.265/MPEG4): Ja
Anschluss via: Netzwerk
Tuner: 8
Empfangsart(en): DVB-C/C2/T/T2
Einkabelbetrieb: Master Input
Netzwerk: 5Port GigaBit mang. Switch
Anzahl CI-Slot(s): 2
Kaskadierbar: Ja
Stromversorgung: über Netzteil
Stromverbrauch: ca. 18 Watt
Related links to "Digital Devices Octopus NET v2 A8i Max - SAT>IP Networktuner"
  • Octopus NET V2 A8i, external (Networktuner, 5-Port Switch, Case)
  • integrated Max A8i (replaceable)
  • integrated Twin CI Interface
  • Software DD-TV online available
  • external power Supply
  • Wall bracket
download   Download Funktionsübersicht Octopus NET v2 System
  • 8 x DVB-C/C2 or
    8 x DVB-T/T2
  • 2 Common Interface slots
  • HDTV H.264 – 1080p
  • DVB-C/C2
  • Demodulation: 16, 64, 256, 1024, 4096 QAM | 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Code Rates | 1/64 and 1/128 Guard Intervals
  • DVB-T/T2
  • Frequency range: 49-861MHz, 2k & 8k OFDM
  • Sensitivity: -82,6dBm bei 16-QAM&3/4
  • Streaming engine
  • 12 single cast clients (unabhängig von der Anzahl der angeschlossenen Tuner)
  • Streaming of 12 complete transponders
  • RTP streaming with very low latency
  • UDP streaming with very low latency
  • Very low jitter
  • Consistent network utilisation and no peaks
    Notice: improve the quality of the WLAN data transmission significantly
  • Complete hardware filtering for all PIDs ( no limitation )
  • SAT>IP (Version 1.2) for 12 singlecast clients and/or max 12 multicast streams
  • flexible configuration singlecast and / or multicast
    SPTS: a SPTS-Version is available for the 8 tuner Octopus NET against an additional fee
  •  
  • Embedded network switch
  • 5 Port managed GigaBit-Switch (10/100/1000)
  • Ethernet protocols IPv4 and IPv6
  • Quality of Service, Audio Video data have priority
  • 8192 MAC addresses
  • 4 class priority for QoS according to IEEE802.1q
  • IP filtering
  • Additional features
  • Very low power consumption
  • Very low stand by power consumption
  • Open Source SW

The rack installation slot for 19 "server racks for slots with 1U for mounting the Octopus NET v2 models.

The installation slot is designed for holding 3 Complete Octopus NETs v2 or Octopus NET MCs with full equipment. The Octopus NET is fixed on the mounting points for wall mounting on the installation frame. For power supply the normal AC adapter of the Octopus NET can be used, this will also be attached to the mounting frame.

The Octopus NETs can be installed on the mounting frame so that either an access to the tuners and network switch or CI slots are accessible through the front openings.

Necessary mountingmaterials for installation in a rack and for attaching the Octopus NET are included.

Note: The 19-inch rack installation slot is compatible with the housings of the Octopus NET v2 and MC models. The models of the Octopus NET v1 can not be used here.

No Octopus NET or Octopus NET housing are included. Pictures are for illustration only

Home

Stream Status

Tuner Status

Hardware Monitor

info

Downloads for your products can be found here...

Manuals, technical drawings and technical data as download or online version and also software and tools.

Furthermore, you will also find information for our TeamViewer QuickSupport.

 

 

 

Hint!
Digital Devices 19-inch rack installation slot for Octopus NET V2 / MC Digital Devices 19-inch rack installation slot...
Content 1 Stück (€0.00 / Stück)
€37.90 *
Set Artikel
Hint!
Set Artikel
Hint!
Set Artikel
Hint!
Set Artikel
Hint!
Set Artikel
Hint!
Set Artikel
Hint!
Set Artikel
Hint!
Viewed