DD Octopus NET V2 Max M4 - Limited Edition (Without CI) - SAT>IP Network Tuner

€293.28 *

Prices plus VAT and shipping costs
(The charging VAT is only calculated on delivery to end customers in the EU Member States)

Ready to ship today,
Delivery time appr. 2-5 workdays europe

  • 291054LE
  Easter Special 2019 and only while stocks last! The network tuner for 4x... more
Product information "DD Octopus NET V2 Max M4 - Limited Edition (Without CI) - SAT>IP Network Tuner"

 Easter Special 2019 and only while stocks last!

The network tuner for 4x DVB-S/S2/C/C2/T/T2/ISDB-T reception in the Limited Edition | Octopus NET V2 Max M4 FreeTV Edition

Distribute Brilliant HDTV in your network

satip-logikThe Octopus Net streams liveTV on IPTV capable devices in the local network. It turns so many devices in Full HD TV for satellites, antennas and cable TV. The free-to-air stations in the local network are distributed via LAN and / or WLAN routers.

The Octopus NET V2 Max M4 - 4 Multituner includes four DVB-S/S2/C/C2/T/T2/ISDB-T multi tuners via 5 ports. The best thing is to switch the reception mode automatically without any configuration. If the client makes a request for satellite reception, one of the 4 tuners will automatically switch to SAT reception, the same happens with cable or terrestrial. Other configurations, if necessary, takes place via web interface, a firmware update takes place if necessary via LAN / Internet.

All models of the Octopus Net series include a 5-port managed GigaBit switch. The Octopus Net can be cascaded if required (control via IP address). Power is supplied via an external power supply. The use of WLAN clients requires an additional WLAN access point. The devices of Octopus NET MAX Series use an active cooling (fan) which operates temperature-controlled.

To use the network tuner, you will need a client software or hardware client for your system environment. The IPTV client software for the protocol SAT> IP may be chargeable. The Digital Devices Octopus NET comes with the free DD-TV software. Enjoy a lot of features: HD quality television, time-shifted TV, Digital Video Recorder, Electronic Program Guide (EPG), Teletext reception.

 

Testberichte-onet


Satellite-TV (Reception via DVB-S/S2)
Customers with a satellite TV connection can usually receive the public television programs (ARD, ZDF, third party programs and additionally many radio stations) in HD quality without SmartCard. Numerous private TV programs are also digitally available on the satellite TV. Optional: For the complete reception of all programs (depending on their contract with the content provider) you need a SA> TIP client with CI / CI + support. The Octopus NET is connected with a standard cabling directly to your multi-switch or LNB with integrated multi-switch.

Single-cable systems according to EN50494 and EN50607 (DVB-S / S2)
Of course, the Octopus NET Max M4 can also be operated on single-cable systems. Here, the existing single-cable cable is split over a Unicable splitter for the 4 ports of the Octopus NET Max M4. The user bands / frequencies are configured in the web interface.

Antenna & Cable TV support (DVB-T / T2 and DVB-C / C2 reception)
As the only certified stand Alone SAT> IP Server with support for cable and antenna TV on the market, the Octopus NET Max M4 also offers the possibility to stream live TV from these sources into your network. The connection of an antenna or your cable TV from your wall socket, will be done by the IEC input socket, so the 4 internal tuners can be used either for satellite or antenna / cable TV. Switching between the reception modes is automatic, depending on the requirement.

 

Developed and manufactured in Germany

 

 

 

Related links to "DD Octopus NET V2 Max M4 - Limited Edition (Without CI) - SAT>IP Network Tuner"
  • Octopus NET V2 Max M4, external (Networktuner, 5-Port Switch, Case)
  • integrated DD Max M4 (replaceable)
  • Software DD-TV (on CD)
  • external power Supply
  • Wall bracket
  • Handbook (on CD)
  • 4x Multi-Band tuner
  • DVB-S (satellite tuner)
  • DVB-S2 (satellite tuner)
  • ISDB-S (satellite tuner)
  • DVB-C (cable tuner)
  • DVB-C2 (cable tuner)
  • ISDB-C (cable tuner)
  • J.83 (cable tuner)
  • DVB-T(terrestrial tuner)
  • DVB-T2 (terrestrial tuner)
  • ISDB-T (terrestrial tuner)
  • DVB-S2 Features
  • QPSK/8PSK up to 46 MSym with up to 120 MBit/s (required for UltraHD transponders)
  • Sensitivity < 30 dBµV
  • DVB-T2 Features
  • DVB-T2 specification versions: 1.1.1, 1.2.1 und 1.3.1
  • DVB-T2 Base Profile
  • DVB-T2 Lite(!) Profile
  • Unicable® SCR / Cenelec EN50494
  • Supports up to 8 tuners with just one antenna cable using Unicable®/ SCR / CENELEC EN50494 compliant LNB or multi switch
  • JESS© / Cenelec EN50607
  • Supports up to 32 tuners with just one antenna cable using CENELEC EN50607 compliant LNB or multi switch
  • DiSEeqC 2.0 Support
  • Streaming engine
  • 12 single cast clients (unabhängig von der Anzahl der angeschlossenen Tuner)
  • Streaming of 12 complete transponders
  • RTP streaming with very low latency
  • UDP streaming with very low latency
  • Very low jitter
  • Consistent network utilisation and no peaks
    Notice: improve the quality of the WLAN data transmission significantly
  • Complete hardware filtering for all PIDs ( no limitation )
  • SAT>IP (Version 1.2) for 12 singlecast clients and/or max 12 multicast streams
  • flexible configuration singlecast and / or multicast
    SPTS: a SPTS-Version is available for the 8 tuner Octopus NET against an additional fee
  •  
  • Embedded network switch
  • 5 Port managed GigaBit-Switch (10/100/1000)
  • Ethernet protocols IPv4 and IPv6
  • Quality of Service, Audio Video data have priority
  • 8192 MAC addresses
  • 4 class priority for QoS according to IEEE802.1q
  • IP filtering
  • Additional features
  • Very low power consumption
  • Very low stand by power consumption
  • Open Source SW
Specifications
  • Satelliten characteristics
  • Up to 46 MSymbols DVB-S2, QPSK, 8PSK
  • LNB Power: 4 * max. 19V, 1A pulse current, 500mA continuous current, overcurrent protection, short-circuit protection
  • L-Band: 950 MHz to 2150 MHz
  • DVB FEC: (Auto Spectral Detection)
  • Modulation: QPSK/8PSK
  • Full DiSeqC 2.X support
  • DVB-C characteristics
  • Frequency range: 51-858 MHz
  • All modulations according to DVB-C specification
  • Symbolraten von 0,87 bis 6,9 MBaud
  • Sensitivity: 47dbµV (64QAM), 47dbµV (256QAM)
  • DVB-C2 characteristics
  • Demodulation
  • 16, 64, 256, 1024, 4096 QAM
  • 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Code Rates
  • 1/64 and 1/128 Guard Intervals
  • 8 MHz and 6 MHz channel bandwidths
  • Data Slices Types 1 & 2 supported
  • Data Slice width up to 7.61 MHz
  • Stream processor for automatic common-PLP
    and data-PLP combination
    – FEC Header Type
    – Robust mode
    – High Efficiency mode
  • Notch Support
  • Narrowband and broadband notches
  • Reception of narrow channels down to 2 MHz between broadband notches
  • Time interleaving modes 4, 8 symbols and ‚best fit‘
  • DVB-T/T2 characteristics
  • Frequency range: 49-861MHz, 2k&8k OFDM
  • All modulations according to DVB-T and DVB-T2 specification
  • Sensitivity: -83,0dBm bei 16-QAM&3/4
  • ISDB-T characteristics
  • Conforms to ARIB STD-B31
  • 6 MHz,7 MHz and 8 MHz BW support
  • Excellent phase noise resistance
  • Excellent multipath equalization performance
  • Automatic detection of mode/guard interval lengths
  • EWS (Emergency Warning System) flag output
  • Security
  • Produced and developed according to european standards, DIN EN ISO 9001:2000
  • Green IT
  • RoHS compliant
  • WEEE DE 99353762
  • Power consumption
  • ≈ 8 watts
  • Dimensions
  • L 126mm, H 126mm, D 52mm

DD-TV Software DD-TV 

For the simple reception via DVB-T/T2, DVB-C/C2 and DVB-S/S2 with all our Digital Devices products for Cine, Octopus and Octopus NET series.


 

OctopusCastTool Software OctopusCast Tool

The universal tool for your Octopus Octopus Net and Net Rack for each solution situation. This tool helps you in generating M3U lists for example MediaPortal and VLC Player. Also, it supports you in generating MultiCast lists for Octopus NET Series.

The rack installation slot for 19 "server racks for slots with 1U for mounting the Octopus NET v2 models.

The installation slot is designed for holding 3 Complete Octopus NETs v2 or Octopus NET MCs with full equipment. The Octopus NET is fixed on the mounting points for wall mounting on the installation frame. For power supply the normal AC adapter of the Octopus NET can be used, this will also be attached to the mounting frame.

The Octopus NETs can be installed on the mounting frame so that either an access to the tuners and network switch or CI slots are accessible through the front openings.

Necessary mountingmaterials for installation in a rack and for attaching the Octopus NET are included.

Note: The 19-inch rack installation slot is compatible with the housings of the Octopus NET v2 and MC models. The models of the Octopus NET v1 can not be used here.

No Octopus NET or Octopus NET housing are included. Pictures are for illustration only

Anleitung


  Drucker   Zur Druckansicht wechseln...

Hint!
19-inch rack installation slot for Octopus NET V2 / MC 19-inch rack installation slot for Octopus NET...
Content 1 Stück (€0.00 / Stück)
€37.90 *
Hint!
Set Artikel
Hint!
Viewed