DD Octopus NET v2 C2T2I / 4 - UK Version - SAT>IP Networktuner

€293.28 *

Prices plus VAT and shipping costs
(The charging VAT is only calculated on delivery to end customers in the EU Member States)

Ready to ship today,
Delivery time appr. 2-5 workdays europe

  • 291069
UK Version of High-End Networktuner - Octopus Net v2 - C2/T2/ISDB-T Tuner Attention:... more
Product information "DD Octopus NET v2 C2T2I / 4 - UK Version - SAT>IP Networktuner"

UK Version of High-End Networktuner - Octopus Net v2 - C2/T2/ISDB-T Tuner

Attention: This device comes with power plug of UK standard BS-1363/A

The Octopus Net streams LiveTV to IPTV-Ready devices in the local network. It makes many devices to a FullHD (*1) receiver for cable and terrestrial television. The FTA channels will stream in FullHD in the LAN or WLAN Network. Up to 12 streams over 4 Tuner may be used simultaneously on stationary and mobile devices. Client software is for the operating systems iOS (iPhone, iPad), Android, Mac OS and Windows already from various manufacturers available on the market. Also Panasonic TVs with SAT>IP support can be used.

The Octopus Net series contains a 5 port gigabit managed switch. The Octopus Net can be cascaded (controlled by IP address). Power is supplied by an external power supply with power plug for standard UK wall sockets. The use of wireless clients requires an additional wireless access point.

*1 Full HD ready, depending on the client

The model Octopus NET V2 C2T2I / 2 includes four DVB-C/C2/T/T2/ISDB-T tuner over 2 inputs. Configuration is done via web interface, a firmware update is carried out via LAN / Internet when needed. The connectivity options are the following in this model: 

  • Direct connection to DVB-C (Cable) or DVB-T (Terrestrial) over one cable with cable loop to the next tuner.

 

 Testberichte-onet55dda77597d64

 

 

SATIP2

 
To use the network tuner you need a client software or a hardware client in your environment. The IPTV client software for the protocol SAT> IP can be paid for, a list of usable products, see http://www.satip.info. The client must be compatible to DVB-C.
 

 

 

SAT>IP Standard: nach V 1.2.2
HDTV (H.264/H.265/MPEG4): Ja
Anschluss via: Netzwerk
Tuner: 4
Empfangsart(en): DVB-C/C2/T/T2
Einkabelbetrieb: Master/Slave
Netzwerk: 5 Port GigaBit Switch
Anzahl CI-Slot(s): 0
Kaskadierbar: Ja
Stromversorgung: über Netzteil
Stromverbrauch: ca. 8 Watt
Rack Version: Nein
Related links to "DD Octopus NET v2 C2T2I / 4 - UK Version - SAT>IP Networktuner"
4 x DVB-C/C2 or 4 x DVB-T/T2
 
HDTV H.264 – 1080p
 
UHD H.265 - HEVC
 
DVB-C/C2
  • Demodulation: 16, 64, 256, 1024, 4096 QAM | 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Code Rates | 1/64 and 1/128 Guard Intervals
DVB-T/T2
  • Frequency range: 49-861MHz, 2k & 8k OFDM
  • Sensitivity: -82,6dBm bei 16-QAM&3/4
Streaming engine
  • 12 single cast clients (unabhängig von der Anzahl der angeschlossenen Tuner)
  • Streaming of 12 complete transponders
  • RTP streaming with very low latency
  • UDP streaming with very low latency
  • Very low jitter
  • Consistent network utilisation and no peaks
    Notice: improve the quality of the WLAN data transmission significantly
  • Complete hardware filtering for all PIDs ( no limitation )
  • SAT>IP (Version 1.2) for 12 singlecast clients and/or max 12 multicast streams
  • flexible configuration singlecast and / or multicast
    SPTS: a SPTS-Version is available for the 8 tuner Octopus NET against an additional fee
Embedded network switch
  • 5 Port managed GigaBit-Switch (10/100/1000)
  • Ethernet protocols IPv4 and IPv6
  • Quality of Service, Audio Video data have priority
  • 8192 MAC addresses
  • 4 class priority for QoS according to IEEE802.1q
  • IP filtering
Additional features
  • Very low power consumption
  • Very low stand by power consumption
  • Open Source SW
 
DVB-C/C2 characteristics
  • Demodulation: 16, 64, 256, 1024, 4096 QAM | 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Code Rates | 1/64 and 1/128 Guard Intervals
  • 8 MHz and 6 MHz channel bandwidths
  • Data Slices, Types 1 & 2 supported, Data Slice width bis zu 7.61 MHz
  • Stream processor for automatic common-PLP und data-PLP combination
  • FEC Header Type, Robust mode, High Efficiency mode
  • Notch Support, Narrowband und broadband notches, Reception of narrow channels down bis 2 MHz between broadband notches
  • Time interleaving modes 4, 8 symbols und ‚best fit‘
Dual tuner DVB-T/T2 characteristics
  • Frequency range: 49-861MHz, 2k & 8k OFDM
  • All modulations according to DVB-T and DVB-T2 specification
  • Sensitivity: -82,6dBm bei 16-QAM&3/4
Security
  • Produced and developed according to european standards, DIN EN ISO 9001:2000
Green IT
  • RoHS compliant
  • WEEE DE 99353762
Power consumption
  • ≈ 8 watts
Dimensions
  • L 126mm, B 126mm, T 52mm
  • Octopus NET V2 C2T2I / 4, external (Networktuner, 5-Port Switch, Case)
  • integrated Max A8i (replaceable)
  • Software DD-TV online available
  • external power Supply
  • Wall bracket
Set Artikel
Hint!
19-inch rack installation slot for Octopus NET V2 / MC 19-inch rack installation slot for Octopus NET...
Content 1 Stück (€0.00 / Stück)
€37.90 *
Viewed