Prices plus VAT and shipping costs
(The charging VAT is only calculated on delivery to end customers in the EU Member States)
Ready to ship today,
Delivery time appr. 2-5 workdays europe
- Order number: UB1095132
Set for the reception of 2 KU band satellites*, e.g. Astra, Hotbird, Eutelsat, etc.
Inverto Unicable II products can be programmed with a special programmer for various applications, such as the reception of multiple satellites. Usually this configuration is only once necessary.
The components in our Unicable II sets are coordinated with each other and are already preprogrammed, so that they can be used immediately. A programmer is not necessary in this case.
This set included follwing components:
2x Inverto Unicable I / II LNB 1/32 - IDLU-32UL40-UNBOO-OPP
1x Inverto Unicable II 2-Way Combiner, 5-2400MHz - IDLU-UCM1O1-OOO2O-OPP
The set is shipped completely pre-programmed, please select the desired configuration above.
This Set is configured following:
1x 32 Channel Unicable
1x LNB Satellite DiSEqC A
1x LNB Satellite DiSEqC B
Unicable Output: Up to 32 participants with Unicable ready devices (See frequency table)
The set is shipped completely pre-programmed.
For a later configuration, the Inverto Programmer is required (Not included). You can find more information about the individual articles in this set on the respective article tabs.
*Installation Note: For neighboring satellite positions (for example, Astra 19.2 and HotBird 13.0), a 90cm dish is required, since otherwise it is possible that the LNBs can not be mounted together on a multifeed bracket due their width !
UniCable LNB for use with devices according UniCable (standard EN 50494 - 8 User bands) and UniCable II (new standard EN50607 - 32 User bands). Through the combination of both standards, older devices can be used, here are the first 8 frequencies available.
Professional Unicable LNB - 32 User Bands - No headend or QAM modulator longer necessary. Unlimited supply of receivers / STBs in static mode or via the Standard Unicable II - 32 User Bands - Perfect for TV cards of Max, Cine and DuoFlex series and everywhere many receivers must be supplied as in apartment buildings and building complexes.
The 32 User bands (frequencies) can be used as static routes for the transport of selected transponders from the satellite, whereby an unlimited number of receivers / tuners can be supplied or via the standard Einkabellösungsvariante according EN50494 / EN50607 to 32 receivers / tuners with direct Unicable Frequency Allocation.
Digital channel stacking technology uses fast wideband analog to digital converters and applies digital signal processing to select desired transponder channels, up convert them and stack them as IF signals over the Unicable output ports. The Unicable2 LNB offers a full flexibility of channel selection, supports many more set-top-boxes over existing cabling thus significantly reducing cost and simplifying installations at subscribers homes. The Static mode, allowing an unlimited number of receivers to be connected to the LNB, makes multi-room distribution and MDU installations substantially cheaper and simpler than ever before. The operating mode - dynamic or static - output power level, channel bandwidth, UB numbers, center frequencies and dish alignment mode are all programmable and can be configured and updated in the field using a dedicated programmer device*.
This Unicable2 LNB enables installations with up to 32 satellite receivers connected over a single coax cable and using the EN50494/EN50607 protocols providing access to unlimited number of transponders (also known as ‘Dynamic’ mode) . Alternatively, it can be configured to deliver a fixed mapping of transponder frequencies to IF frequencies (also known as ‘Static’ mode), allowing an unlimited number of receivers to be connected and providing them access to up to 32 transponders (or more, depending on the bandwidth of the desired transponders) based on digital channel stacking technology.
The LNB can be powered over a connected STB or by an AC/DC adapter over a power inserter in case the STB is unable to provide the necessary power. The Unicable2 LNB is backward compatible, fully compliant with both EN50494 and EN50607 standards and integrates seamlessly into EN50494-only or mixed EN50494/EN50607 installations of compatible STBs, Next Generation PVRs and HGWs.
■ Low phase Noise HDTV-DVBS2 compliant
■ Low Noise Figure
■ Very high cross-pol isolation
■ Programmable Static frequency mapping mode
■ Dish alignment mode
* Programmer not included, sold separately as an optional accessory.
Inverto combiner to connect two Unicable LNB or multi-switch.
Using the Inverto Combiners, connect two Unicable Inverto multiswitch or LNB (not supported by any model) to one receiving unit for receiving several satellites. For this purpose the LNB / multiswitch must be programmed according to the incoming position requests (DiSEqC) react properly. It is for this purpose requires a special programming device that you can purchase or rent from us.
Note: Unfortunately, this article can not be delivered at the moment by manufacturer.
|1||Unicable I & II||1210 MHz|
|2||Unicable I & II||1420 MHz|
|3||Unicable I & II||1680 MHz|
|4||Unicable I & II||2040 MHz|
|5||Unicable I & II||984 MHz|
|6||Unicable I & II||1020 MHz|
|7||Unicable I & II||1056 MHz|
|8||Unicable I & II||1092 MHz|
|9||Unicable II||1128 MHz|
|10||Unicable II||1164 MHz|
|11||Unicable II||1256 MHz|
|12||Unicable II||1292 MHz|
|13||Unicable II||1328 MHz|
|14||Unicable II||1364 MHz|
|15||Unicable II||1458 MHz|
|16||Unicable II||1494 MHz|
|17||Unicable II||1530 MHz|
|18||Unicable II||1566 MHz|
|19||Unicable II||1602 MHz|
|20||Unicable II||1638 MHz|
|21||Unicable II||1716 MHz|
|22||Unicable II||1752 MHz|
|23||Unicable II||1788 MHz|
|24||Unicable II||1824 MHz|
|25||Unicable II||1860 MHz|
|26||Unicable II||1896 MHz|
|27||Unicable II||1932 MHz|
|28||Unicable II||1968 MHz|
|29||Unicable II||2004 MHz|
|30||Unicable II||2076 MHz|
|31||Unicable II||2112 MHz|
|32||Unicable II||2148 MHz|
*The Channels 1-8 are according to EN50494 and EN50607
The Channels 9-32 are according to EN50607